Help with check_ntp
Michael Jewett
mgj at unb.ca
Tue Feb 11 19:12:36 CET 2003
hi,
I got the latest version of the check_ntp(v1.12) and it seemed to work a
little bit. but it complained some, so looking at the source, I noticed that
it was making reference to things in utils, so I got the latest version of
that as well, since I noticed a change in that.
So I currently have:
check_ntp --> 1.12
utils.pm --> 1.6
Now my error message is as follows, again using verbose mode:
./check_ntp -H xxx.xxx.xxx.xxx -v
server xxx.xxx.xxx.xxx, stratum 2, offset 0.005577, delay 0.02592
ntperr = 0
11 Feb 14:06:39 ntpdate[11392]: adjust time server 131.202.3.20 offset
0.005577 sec
ntperr = 0
remote refid st t when poll reach delay offset
jitter
============================================================================
==
192.68.54.20 0.0.0.0 16 - - 1024 0 0.000 0.000
16000.0
198.164.163.107 0.0.0.0 16 - - 1024 0 0.000 0.000
16000.0
x128.118.46.3 .WWV. 1 u 510 1024 377 79.120 -36.329
1.130
+128.118.25.3 192.5.41.209 2 u 470 1024 377 79.150 -0.815
0.980
Candiate count= 1
129.116.3.5 0.0.0.0 16 - - 1024 0 0.000 0.000
16000.0
yyy.yyy.yyy.yyy 0.0.0.0 16 - - 1024 0 0.000 0.000
16000.0
132.246.168.80 0.0.0.0 16 - - 1024 0 0.000 0.000
16000.0
+132.246.168.2 .PPS. 1 u 851 1024 377 25.010 -0.283
0.200
Candiate count= 2
*132.246.168.3 .PPS. 1 u 216 1024 377 24.980 -0.554
0.240
Candiate count= 3
Use of uninitialized value at ./check_ntp line 297.
UNKNOWN: Jitter too high
Any ideas?
Michael
----- Original Message -----
From: "Subhendu Ghosh" <sghosh at sghosh.org>
To: "Michael Jewett" <mgj at unb.ca>
Cc: <nagios-users at lists.sourceforge.net>
Sent: Tuesday, February 11, 2003 12:01 PM
Subject: Re: [Nagios-users] Help with check_ntp
> On Tue, 11 Feb 2003, Michael Jewett wrote:
>
> > Hi,
> >
> > I'm trying to get the check_ntp to work on my newly installed Nagios
setup.
> > Here is what I did for running it and the output...
> >
> > ./check_ntp -H ntp.domain.ca -v
> > server xxx.xxx.xxx.xxx, stratum 2, offset -0.000924, delay 0.02592
> > ntperr = 0
> > 29 Jan 15:33:38 ntpdate[9302]: adjust time server xxx.xxx.xxx.xxx
> > offset -0.000924 sec
> > ntperr = 0
> > ***Server reports a format error in the received packet (shouldn't
happen)
> > UNKNOWN: Dispersion too high
> >
> > Does anyone have a suggestion on how to fix it?
> >
> > This worked great with Netsaint.
> >
>
> Version info helps.
>
> Can you use the latest CVS - check_ntp now uses ntpdate and ntpq (over
> ntpdc)
>
> --
> -sg
>
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
More information about the Users
mailing list