Nrpe Error Message

[Kaplan, Andrew H.]

The command that I entered at the monitoring host was

./check_nrpe -H oneofxeon -p 5666 -C /usr/local/nagios/libexec/check_disk -w
80 -c 95

The result was INCORRECT COMMAND LINE ARGUMENTS SUPPLIED

What gives?

-----Original Message-----
From: Jeremy Tinley [mailto:jtinley at unirez.com]
Sent: Wednesday, January 08, 2003 11:49 AM
To: Kaplan, Andrew H.
Subject: RE: [Nagios-users] Nrpe Error Message


Try running the check_nrpe command from the monitoring host.

check_nrpe -H <host> -p <port> -C check_userrs

see if that gets you any further.

I noticed that -H and -p were added in the change from nrpe 1.5 to 1.6

-J

-----Original Message-----
From: nagios-users-admin at lists.sourceforge.net
[mailto:nagios-users-admin at lists.sourceforge.net] On Behalf Of Kaplan,
Andrew
H.
Sent: Wednesday, January 08, 2003 10:33 AM
To: 'Carroll, Jim P [Contractor]'
Cc: Nagios-users at lists.sourceforge.net
Subject: RE: [Nagios-users] Nrpe Error Message

Things got a little better since I sent out my e-mail. I am getting a
connection
to
to the remote client. Now I am getting an INCORRECT COMMAND LINE ARGUMENTS
SUPPLIED
error.

When I run the check from the command line, it comes out fine.

Here is the syntax of the nrpe.cfg file on the client:

command[check_users]=/usr/local/nagios/libexec/check_users 50 80
command[check_disk1]=/usr/local/nagios/libexec/check_disk 80 95 /dev/sda8
command[check_load]=/usr/local/nagios/libexec/check_load 15,10,5 30,25,20
command[check_procs]=/usr/local/nagios/libexec/check_procs 150 200

What is going on?

-----Original Message-----
From: Carroll, Jim P [Contractor] [mailto:jcarro10 at sprintspectrum.com]
Sent: Wednesday, January 08, 2003 11:05 AM
To: Kaplan, Andrew H.; Nagios-users at lists.sourceforge.net
Subject: RE: [Nagios-users] Nrpe Error Message


And running check_nrpe from the command line...?  Pass or fail...?

jc

> -----Original Message-----
> From: Kaplan, Andrew H. [mailto:AHKAPLAN at PARTNERS.ORG]
> Sent: Wednesday, January 08, 2003 9:00 AM
> To: Nagios-users at lists.sourceforge.net
> Subject: [Nagios-users] Nrpe Error Message
> 
> 
> I installed the latest nrpe client on a remote machine, and 
> also copied the
> necessary
> plugins from the nagios server to the client. The nrpe.cfg 
> file was modified
> to suit the
> remote machine's configuration. When I tried to monitor the 
> various services
> on the client
> I was confronted with the following error message:
> 
> Return code of 127 is out of bounds - plugin may be missing.
> 
> I am running Nagios 1.0 with the latest nrpe client as well 
> as the latest
> nagios plug-ins.
> 
> There were no apparent problems with compiling and installing the nrpe
> client on the remote machine.
> 
> The /etc/xinetd.d services were restarted after the nrpe install was
> complete.
> 
> The nagios server is running on a Red Hat 8.0 box and the 
> remote client is
> Red Hat 7.3
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.NET email is sponsored by:
> SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
> http://www.vasoftware.com
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> 


-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users


-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com