OT - Sendpage and Arch Wireless

Russell Adams RLAdams at Kelsey-Seybold.com
Thu Jan 30 22:34:35 CET 2003


What is your sendpage.cf look like for the modem definitions and such?

I'll give you some samples from mine below.

BTW, please include your replies on the list to maintain continuity.

Russell


Samples from sendpage.cf for Arch (formerly Mobilcomm):

[modem:multitech_01]
data    = 7
parity  = even
stop    = 1
flow   = rts
baud   = 1200
dev     = /dev/modem1
init   = ATL1M0E1V1X4S11=50

[pc:MobilCommLocalOnly]
rundelay=5
phonenum=       713-781-5116
maxchars=       230

[recip:rladams]
dest=   1234567890 at MobilCommLocalOnly



On Thu, Jan 30, 2003 at 03:56:32PM -0500, Robin Brown wrote:
> Oh, I certainly hope so.  Arch support basically told me to contact my
> software vendor.  See below:
> 
> Jan 29 13:20:10 proxy sendpage[3383]: starting Queue Manager (sendpage
> v0.9.14)
> Jan 29 13:20:10 proxy sendpage[3383]: starting SNPP listeners
> Jan 29 13:20:27 proxy sendpage[3386]: archwireless/q104386442703386000:
> state=Queued, to=robin at archwireless,
> from=sendpage at mydomain.com(localhost), size=5
> Jan 29 13:20:58 proxy sendpage[3384]: Dropping bad char 0x0A
> Jan 29 13:20:58 proxy sendpage[3384]: immediate disconnect requested!
> Jan 29 13:21:00 proxy sendpage[3384]: archwireless/q104386442703386000:
> state=Temp-Failure, to=robin at archwireless, from=sendpage@ mydomain.com,
> size=5, PC='{0x0A}Too Slow - Good Bye{0x0A}'{0x0A}
> 
> Here is the debug output of sendpage initializing:
> 
> (3471: debug) found listing for pc: archwireless
> (3471: debug) Locking with '/var/lock/LCK..modem' ...
> (3471: debug) Modem 'sportster' setting 'Baud': '2400'
> (3471: debug) Modem 'sportster' setting 'Parity': 'even'
> (3471: debug) Modem 'sportster' setting 'Data': '7'
> (3471: debug) Modem 'sportster' setting 'Stop': '1'
> (3471: debug) Modem 'sportster' setting 'Flow': 'rts'
> (3471: debug) Modem 'sportster' setting 'Init': 'ATZ'
> (3471: debug) Modem 'sportster' setting 'InitOK': 'OK'
> (3471: debug) Modem 'sportster' setting 'InitWait': '4'
> (3471: debug) Modem 'sportster' setting 'InitRetry': '2'
> (3471: debug) Modem 'sportster' setting 'Error': 'ERROR'
> (3471: debug) Modem 'sportster' setting 'Dial': 'ATDT'
> '3471: debug) Modem 'sportster' setting 'DialOK': 'CONNECT.*
> (3471: debug) Modem 'sportster' setting 'DialWait': '60'
> (3471: debug) Modem 'sportster' setting 'DialRetry': '3'
> (3471: debug) Modem 'sportster' setting 'NoCarrier': 'ERROR|NO
> CARRIER|BUSY|NO DIAL|VOICE'
> (3471: debug) Modem 'sportster' setting 'CarrierDetect': 'on'
> (3471: debug) Modem 'sportster' setting 'DTRToggleTime': '0.5'
> (3471: debug) Modem 'sportster' setting 'LongDist': '1'
> (3471: debug) Modem 'sportster' setting 'DialOut': '8,'
> (3471: debug) baud requested: '2400' baud set: '2400'
> (3471: debug) parity requested: 'even' parity set: 'even'
> (3471: debug) databits requested: '7' databits set: '7'
> (3471: debug) stopbits requested: '1' stopbits set: '1'
> (3471: debug) flow requested: 'rts' flow set: 'rts'
> (3471: debug) reseting DTR ...
> (3471: debug) forcing RTS ...
> (3471: debug)      to send: ATZ{0x0D}
> (3471: debug)      want: OK
> (3471: debug)      kicker: ATZ{0x0D}
> (3471: debug)      timeout: 4 retries: 2
> (3471: debug)      have:
> (3471: debug) wrote: 4 ATZ{0x0D}
> (3471: debug) 4 seen: ATZ{0x0D}
> (3471: debug) have: ATZ{0x0D}
> (3471: debug) 6 seen: {0x0D}{0x0A}OK{0x0D}{0x0A}
> (3471: debug) have: ATZ{0x0D}{0x0D}{0x0A}OK{0x0D}{0x0A}
> (3471: debug) chat success: OK
> (3471: debug) Modem Object 'sportster' being destroyed
> (3471: debug) unlocking Modem 'sportster'
> (3471: debug) Modem Object 'sportster' destroyed
> (3471: debug) found functioning modem: sportster
> 
> I seem to only be able to connect to this PC at 2400,7,e,1.  When I use
> minicom, I get the ID= string just fine.  I have turned debug=true
> everywhere possible in the sendpage.cf file, yet this is the only output
> I get in the messages file?
> 
> Any help is greatly appreciated!
> 
> -Robin
> 
> 
> -----Original Message-----
> From: nagios-users-admin at lists.sourceforge.net
> [mailto:nagios-users-admin at lists.sourceforge.net] On Behalf Of Russell
> Adams
> Sent: Thursday, January 30, 2003 2:53 PM
> To: nagios-users at lists.sourceforge.net
> Subject: Re: [Nagios-users] OT - Sendpage and Arch Wireless
> 
> I use Arch with Sendpage, and previously Qpage.
> 
> What exactly is the problem you're having?
> 
> I've worked many problems with Arch tech support, and I support about
> 500
> pagers. Perhaps I've already seen the problem you're having. ;]
> 
> Russell
> 
> On Thu, Jan 30, 2003 at 01:33:08PM -0500, Robin Brown wrote:
> > Looking for someone else using Arch for modem paging.  I'm trying to
> use
> > modem paging with my installed and working Nagios server but I'm
> having
> > some issues and not finding too much help available.  The problem
> seems
> > to lie in the communication with Arch.
> > 
> > I'd appreciate it if anyone using this could contact me.
> > 
> > 
> > Thanks and regards,
> > Robin
> > 
> > 
> > 
> > 
> > -------------------------------------------------------
> > This SF.NET email is sponsored by:
> > SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
> > http://www.vasoftware.com
> > _______________________________________________
> > Nagios-users mailing list
> > Nagios-users at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/nagios-users
> 
> 
> -------------------------------------------------------
> This SF.NET email is sponsored by:
> SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
> http://www.vasoftware.com
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users


-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com




More information about the Users mailing list