Rép. : [Nagios-users] CHECK_NRPE: Error - Could not complete SSL handshake

Andreas Ericsson ae at op5.se
Wed Nov 24 17:38:01 CET 2004


Serveur-Faucon Surveillance wrote:
> Both hosts must have the same version of openssl.
> 

No, they don't. They just need to have devel packages installed at 
compile-time, and static libraries at compile time OR shared libraries 
(much more common) both at compile time and run time.

> On the console of both machines, type
> 
> openssl version
> 
> 
> It should be the same. If you dont have openssl on one of them, install the same version :)
> 
> Alexandre
> 
> 
> 
> ---------------------------------------------------
> Alexandre Racine
> Montréal, Québec, Canada
> 
> 
>>>>"Figueroa, Daniel" <DFigueroa at roseville.ca.us> 2004-11-23 15:11:14 >>>
> 
> I'm unable to execute as a test from my SUSE 9.2 Nagios server -
> 
>  [root at Z3 root]# /usr/local/nagios/libexec/check_nrpe -H HPUX_srvr -c check_load
> 
> 
>>>I'm receiving the following error and can use your help in understanding why?
> 
> 
> CHECK_NRPE: Error - Could not complete SSL handshake
> 
> I was told I have to be up-to-date on plugins, which I am -
> 
> Note: The HPUX_srvr is a HP-UX 10.20 running nrpe-1.8-B.10.20.depot.  The Nagios server is
> using the latest "Nagios Plugins HP-UX" from NagiosExchange.org, such as check_load.
> 
> On the HPUX_srvr box, I've configured the inetd.conf file to launch - 
> 
> nrpe   stream tcp nowait rose /usr/sbin/tcpd /usr/local/nagios/bin/nrpe -c /usr/ local/nagios/bin/nrpe.cfg
> 
> Doing a netstat on my HPUX box, I can see the service is listening, per /etc/service configuration.
> 
> tcp        0      0  *.nrpe                 *.*                    LISTEN
> 
> # The following are my entries in the nrpe.cfg file::  
> command[check_users]=@libexecdir@/check_users -w 5 -c 10
> command[check_load]=@libexecdir@/check_load -w 15,10,5 -c 30,25,20
> command[check_disk1]=@libexecdir@/check_disk -w 20 -c 10 -p /dev/hda1
> command[check_disk2]=@libexecdir@/check_disk -w 20 -c 10 -p /dev/hdb1
> command[check_zombie_procs]=@libexecdir@/check_procs -w 5 -c 10 -s Z
> command[check_total_procs]=@libexecdir@/check_procs -w 150 -c 200
> 
> 
>>>How does @libexecdir@ know where my check_users lives?
> 
> 
> Thanks in advance,
> Daniel
> 
> 
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/ 
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net 
> https://lists.sourceforge.net/lists/listinfo/nagios-users 
> ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
> 
> 
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now. 
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
> ::: Messages without supporting info will risk being sent to /dev/null
> 

-- 
Andreas Ericsson                   andreas.ericsson at op5.se
OP5 AB                             www.op5.se
Lead Developer


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null





More information about the Users mailing list