[Fwd: CHECK_NRPE: Error receiving data from daemon help needed]

roadbox roadbox at midsouth.rr.com
Sun Nov 28 21:38:46 CET 2004
Previous message: Is there something wrong with the list?
Next message: [Fwd: CHECK_NRPE: Error receiving data from daemon help needed]
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Hello Linux challenged here
I've yet to successfully use the npre/check_nrpe tools, but I sure wont to
I believe my problem is in the .cfg  files...I 've enclosed them below...

Could someone "correct them" and/or post a working example for me to 
adjust appropriate to my system
###by Mo===
define service{
name   generic-service
active_checks_enabled           1
passive_checks_enabled          1
parallelize_check               1
obsess_over_service             1
check_freshness                 1
notifications_enabled           1
event_handler_enabled           1
flap_detection_enabled          1
process_perf_data               1
retain_status_information       1
retain_nonstatus_information    1
register                        0
}


###service defination
define service{
use                    generic-service
host_name              jmooo
service_description    check_users
is_volatile            0
check_period           24x7
max_check_attempts     3
normal_check_interval  5
retry_check_interval   1
contact_groups         staff
notification_interval   120
notification_period     24x7
notification_options   w,u,c,r
check_command           check_nrpe!check_users
}


###service defination
###service defination
define service{
use                    generic-service
host_name              jmooo
service_description    check_disk1
is_volatile            0
check_period           24x7
max_check_attempts     3
normal_check_interval  5
retry_check_interval   1
contact_groups         staff
notification_interval   120
notification_period     24x7
notification_options   w,u,c,r
check_command           check_nrpe!check_disk1
}
############the nrpe addition to xinetd.d/ on the test client
# default: off
# description: NRPE (Nagios Remote Plugin Executor)
service nrpe
{
      flags           = REUSE
  type        = UNLISTED
  port        = 5666
      socket_type     = stream
      wait            = no
      user            = nagios
      group           = nagios
      server          = /usr/sbin/nrpe
      server_args     = -c /etc/nagios/nrpe.cfg --inetd
      log_on_failure  += USERID
      disable         = no
      only_from       = 192.168.3.2
}

#########################the client nrpe.cfg on the test client
############################################################################# 

# Sample NRPE Config File
# Written by: Ethan Galstad (nagios at nagios.org)
#
# Last Modified: 03-05-2003
#
# NOTES:
# This is a sample configuration file for the NRPE daemon.  It needs to be
# located on the remote host that is running the NRPE daemon, not the host
# from which the check_nrpe client is being executed.
############################################################################# 




# PORT NUMBER
# Port number we should wait for connections on.
# NOTE: This must be a non-priviledged port (i.e. > 1024).
# NOTE: This option is ignored if NRPE is running under either inetd or 
xinetd

server_port=5666



# SERVER ADDRESS
# Address that nrpe should bind to in case there are more than one 
interface
# and you do not want nrpe to bind on all interfaces.
# NOTE: This option is ignored if NRPE is running under either inetd or 
xinetd

#server_address=192.168.1.1



# ALLOWED HOST ADDRESSES
# This is a comma-delimited list of IP address of hosts that are allowed
# to talk to the NRPE daemon.
#
# NOTE: The daemon only does rudimentary checking of the client's IP
#       address.  I would highly recommend adding entries in your
#    /etc/hosts.allow file to allow only the specified host to connect
#    to the port you are running this daemon on.
#
# NOTE: This option is ignored if NRPE is running under either inetd or 
xinetd

allowed_hosts=127.0.0.1



# NRPE USER
# This determines the effective user that the NRPE daemon should run as. 
# You can either supply a username or a UID.
#
# NOTE: This option is ignored if NRPE is running under either inetd or 
xinetd

nrpe_user=nagios



# NRPE GROUP
# This determines the effective group that the NRPE daemon should run 
as. # You can either supply a group name or a GID.
#
# NOTE: This option is ignored if NRPE is running under either inetd or 
xinetd

nrpe_group=nagios



# COMMAND ARGUMENT PROCESSING
# This option determines whether or not the NRPE daemon will allow clients
# to specify arguments to commands that are executed.  This option only 
works
# if the daemon was configured with the --enable-command-args configure 
script
# option. #
# *** ENABLING THIS OPTION IS A SECURITY RISK! ***
# Read the SECURITY file for information on some of the security 
implications
# of enabling this variable.
#
# Values: 0=do not allow arguments, 1=allow command arguments

dont_blame_nrpe=0



# DEBUGGING OPTION
# This option determines whether or not debugging messages are logged to 
the
# syslog facility.
# Values: 0=debugging off, 1=debugging on

debug=0



# COMMAND TIMEOUT
# This specifies the maximum number of seconds that the NRPE daemon will
# allow plugins to finish executing before killing them off.

command_timeout=60



# INCLUDE CONFIG FILE
# This directive allows you to include definitions from an external 
config file.

#include=<somefile.cfg>



# INCLUDE CONFIG DIRECTORY
# This directive allows you to include definitions from config files 
(with a
# .cfg extension) in one or more directories (with recursion).

#include_dir=<somedirectory>
#include_dir=<someotherdirectory>



# COMMAND DEFINITIONS
# Command definitions that this daemon will run.  Definitions
# are in the following format:
#
# command[<command_name>]=<command_line>
#
# When the daemon receives a request to return the results of 
<command_name>
# it will execute the command specified by the <command_line> argument.
#
# Unlike Nagios, the command line cannot contain macros - it must be
# typed exactly as it should be executed.
#
# Note: Any plugins that are used in the command lines must reside
# on the machine that this daemon is running on!  The examples below
# assume that you have plugins installed in a /usr/local/nagios/libexec
# directory.  Also note that you will have to modify the definitions below
# to match the argument format the plugins expect.  Remember, these are
# examples only!

# The following examples use hardcoded command arguments...

command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10
command[check_load]=/usr/lib/nagios/plugins/check_load -w 15,10,5 -c 
30,25,20
command[check_disk1]=/usr/lib/nagios/plugins/check_disk -w 20 -c 10 -p 
/dev/hda1
command[check_disk2]=/usr/lib/nagios/plugins/check_disk -w 20 -c 10 -p 
/dev/hdb1
command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 
10 -s Z
command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 
200

# The following examples allow user-supplied arguments and can
# only be used if the NRPE daemon was compiled with support for
# command arguments *AND* the dont_blame_nrpe directive in this
# config file is set to '1'...

#command[check_users]=/usr/lib/nagios/plugins/check_users -w $ARG1$ -c 
$ARG2$
#command[check_load]=/usr/lib/nagios/plugins/check_load -w $ARG1$ -c $ARG2$
#command[check_disk]=/usr/lib/nagios/plugins/check_disk -w $ARG1$ -c 
$ARG2$ -p $ARG3$
#command[check_procs]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c 
$ARG2$ -s $ARG3$

###############all my nagios files have user nagios group nagios



-- 
Blessings Mo===




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when 
reporting any issue. ::: Messages without supporting info will risk 
being sent to /dev/null

-- 
Blessings Mo===




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when 
reporting any issue. ::: Messages without supporting info will risk 
being sent to /dev/null

-- 
Blessings Mo===

-------------- next part --------------
An embedded message was scrubbed...
From: roadbox <roadbox at midsouth.rr.com>
Subject: [Nagios-users] CHECK_NRPE: Error receiving data from daemon    help needed
Date: Sat, 27 Nov 2004 18:14:57 -0600
Size: 12194
URL: <https://www.monitoring-lists.org/archive/users/attachments/20041128/0ccf8014/attachment.mht>
Previous message: Is there something wrong with the list?
Next message: [Fwd: CHECK_NRPE: Error receiving data from daemon help needed]
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the Users mailing list