Nagios Performance Data shows checks aren't being completed

sheeri kritzer awfief at gmail.com
Mon Dec 12 23:43:20 CET 2005


Hi all,

My nagios 2.0 installation shows the following under performance
information.  There are 99 service checks, and I can't imagine it
takes more than an hour to complete all 99.  We've had problems where
nagios hasn't found and notified us of problems.  The load on the box
is tiny.  nagios -s has no suggestions.  What did I do wrong?

 uptime
 17:38:38 up 81 days,  9:05,  4 users,  load average: 0.00, 0.00, 0.00

Nagios is running, and has been for a while:

ps -ef | grep nagios
nagios   11160     1  0 Nov14 ?        00:12:32 /usr/bin/nagios -d
/etc/nagios/nagios.cfg
nagios   22947     1  0 Nov20 ?        00:00:00 nrpe -c /etc/nagios/nrpe.cfg -d

Performance Info:

Program-Wide Performance Information
Active Service Checks:
	
Time Frame	Checks Completed
<= 1 minute:	1 (1.0%)
<= 5 minutes:	58 (58.6%)
<= 15 minutes:	60 (60.6%)
<= 1 hour:	60 (60.6%)
Since program start:  	99 (100.0%)
	
Metric	Min.	Max.	Average
Check Execution Time:  	0.01 sec	8.71 sec	1.286 sec
Check Latency:	0.01 sec	1.03 sec	0.488 sec
Percent State Change:	0.00%	0.00%	0.00%
Passive Service Checks:
	
Time Frame	Checks Completed
<= 1 minute:	0 (0.0%)
<= 5 minutes:	0 (0.0%)
<= 15 minutes:	0 (0.0%)
<= 1 hour:	0 (0.0%)
Since program start:  	0 (0.0%)
	
Metric	Min.	Max.	Average
Percent State Change:  	0.00%	0.00%	0.00%
Active Host Checks:
	
Time Frame	Checks Completed
<= 1 minute:	0 (0.0%)
<= 5 minutes:	0 (0.0%)
<= 15 minutes:	0 (0.0%)
<= 1 hour:	0 (0.0%)
Since program start:  	19 (76.0%)
	
Metric	Min.	Max.	Average
Check Execution Time:  	3.01 sec	4.01 sec	3.972 sec
Check Latency:	0.00 sec	0.00 sec	0.000 sec
Percent State Change:	0.00%	0.00%	0.00%
Passive Host Checks:
	
Time Frame	Checks Completed
<= 1 minute:	0 (0.0%)
<= 5 minutes:	0 (0.0%)
<= 15 minutes:	0 (0.0%)
<= 1 hour:	0 (0.0%)
Since program start:  	0 (0.0%)
	
Metric	Min.	Max.	Average
Percent State Change:  	0.00%	0.00%	0.00%

----------------------------------------------------------------------------------------------------------------------------

Nagios 2.0b4
Copyright (c) 1999-2005 Ethan Galstad (http://www.nagios.org)
Last Modified: 08-02-2005
License: GPL

Projected scheduling information for host and service
checks is listed below.  This information assumes that
you are going to start running Nagios with your current
config files.

HOST SCHEDULING INFORMATION
---------------------------
Total hosts:                     25
Total scheduled hosts:           0
Host inter-check delay method:   SMART
Average host check interval:     0.00 sec
Host inter-check delay:          0.00 sec
Max host check spread:           30 min
First scheduled check:           N/A
Last scheduled check:            N/A


SERVICE SCHEDULING INFORMATION
-------------------------------
Total services:                     99
Total scheduled services:           99
Service inter-check delay method:   SMART
Average service check interval:     300.00 sec
Inter-check delay:                  3.03 sec
Interleave factor method:           SMART
Average services per host:          3.96
Service interleave factor:          4
Max service check spread:           30 min
First scheduled check:              Mon Dec 12 17:39:51 2005
Last scheduled check:               Mon Dec 12 17:44:47 2005


CHECK PROCESSING INFORMATION
----------------------------
Service check reaper interval:      10 sec
Max concurrent service checks:      Unlimited


PERFORMANCE SUGGESTIONS
-----------------------
I have no suggestions - things look okay.


---------------------------------------------------------------------------------------------------------------------------------

grep -v ^# /etc/nagios/nagios.cfg  | grep -v ^$
Nagios.cfg params:

log_file=/var/log/nagios/nagios.log
cfg_file=/etc/nagios/checkcommands.cfg
cfg_file=/etc/nagios/misccommands.cfg
cfg_file=/etc/nagios/contactgroups.cfg
cfg_file=/etc/nagios/contacts.cfg
cfg_file=/etc/nagios/dependencies.cfg
cfg_file=/etc/nagios/escalations.cfg
cfg_file=/etc/nagios/hostgroups.cfg
cfg_file=/etc/nagios/hosts.cfg
cfg_file=/etc/nagios/services.cfg
cfg_file=/etc/nagios/timeperiods.cfg
object_cache_file=/var/log/nagios/objects.cache
resource_file=/etc/nagios/resource.cfg
status_file=/var/log/nagios/status.dat
nagios_user=nagios
nagios_group=nagios
check_external_commands=1
command_check_interval=-1
command_file=/var/log/nagios/rw/nagios.cmd
comment_file=/var/log/nagios/comments.dat
downtime_file=/var/log/nagios/downtime.dat
lock_file=/var/run/nagios.pid
temp_file=/var/log/nagios/nagios.tmp
event_broker_options=-1
log_rotation_method=d
log_archive_path=/var/log/nagios/archives
use_syslog=1
log_notifications=1
log_service_retries=1
log_host_retries=1
log_event_handlers=1
log_initial_states=0
log_external_commands=1
log_passive_checks=1
service_inter_check_delay_method=s
max_service_check_spread=30
service_interleave_factor=s
host_inter_check_delay_method=s
max_host_check_spread=30
max_concurrent_checks=0
service_reaper_frequency=10
auto_reschedule_checks=0
auto_rescheduling_interval=30
auto_rescheduling_window=180
sleep_time=0.25
service_check_timeout=60
host_check_timeout=30
event_handler_timeout=30
notification_timeout=30
ocsp_timeout=5
perfdata_timeout=5
retain_state_information=1
state_retention_file=/var/log/nagios/retention.dat
retention_update_interval=60
use_retained_program_state=1
use_retained_scheduling_info=0
interval_length=60
use_aggressive_host_checking=0
execute_service_checks=1
accept_passive_service_checks=1
execute_host_checks=1
accept_passive_host_checks=1
enable_notifications=1
enable_event_handlers=1
process_performance_data=0
obsess_over_services=0
check_for_orphaned_services=0
check_service_freshness=1
service_freshness_check_interval=60
check_host_freshness=0
host_freshness_check_interval=60
aggregate_status_updates=1
status_update_interval=15
enable_flap_detection=0
low_service_flap_threshold=5.0
high_service_flap_threshold=20.0
low_host_flap_threshold=5.0
high_host_flap_threshold=20.0
date_format=us
p1_file=/usr/bin/p1.pl
illegal_object_name_chars=`~!$%^&*|'"<>?,()=
illegal_macro_output_chars=`~$&|'"<>
use_regexp_matching=0
use_true_regexp_matching=0
admin_email=nagios
admin_pager=pagenagios
daemon_dumps_core=0

Any help is much appreciated.

Thank you,

Sheeri Kritzer


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id865&op=click
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null





More information about the Users mailing list