check_disk on Solaris 8 and 9

[Aaron Carr]

Luc,

It works with the check_disk binary you sent.

I'm assuming it must be something to do with libraries that were on the
system that compiled the plugins before I packaged them, that are not on the
older systems.

All of my new systems installed via JumpStart are fine with it. It's just
these two older systems that were built by hand that had the issue.

Thank you very much for helping out.

Aaron

On 11/8/05, Luc I. Suryo <luc at suryo.com> wrote:
>
>
> Aaron,
>
> it uses /usr/local/bin/df
>
> So i presume this is GNU df check if it allows the -P and the output is
> useable bij check_disk.
>
> here is mine
>
> 2:22 gizmo[305] /export/home/staff/luc/work/nagios/check_disk -V
> check_disk (nagios-plugins 1.3.1) 1.7.2.4 <http://1.7.2.4>
>
> 12:22 gizmo[307] /export/home/staff/luc/work/nagios/check_disk -w 70 -c 65
> -p /export
> DISK OK [13769586 kB (66%) free on /dev/dsk/c1t0d0s3]
>
> 12:24 gizmo[313] /export/home/staff/luc/work/nagios/check_disk -w 70 -c 65
> /dev/dsk/c1t0d0s0
> DISK OK [5463269 kB (53%) free on /dev/dsk/c1t0d0s0]
>
> also my truss.out is quite bigger then your.. kind weird.. attached mthe
> binary i use, (all Sparc system 7/8/9/10)
>
>
> I think something got mixed up during ./configure and the system where
> it was compile is not the same where you try to use, not much nut enough
> to cuase problem...
>
>
>
> > Truss.out is attached.
> >
> > On 11/8/05, Luc I. Suryo <luc at suryo.com> wrote:
> > >
> > >
> > > Aaron,
> > >
> > > can you do this
> > >
> > > truss -f -o truss.out check_disk ......
> > >
> > > and then show me the truss.out file?
> > >
> > > again this is the -P issue and what version are we talking about?
> > >
> > >
> -ls
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.monitoring-lists.org/archive/users/attachments/20051108/72cab874/attachment.html>