NSCA Time Out

Ian Marks imarks at comcast.net
Fri May 5 21:23:39 CEST 2006


I'm running nsca Version: 2.6, which doesn't appear to support the 
allowed_hosts variable.  The fact that I'm able to see a vaild tcp 
session would show that nothing is blocking it??

Morris, Patrick wrote:
> OK, that still leaves one question (I feel like a dentist):
>
>   
>>> If standalone, is the nsca server configured to allow connections 
>>> from your clients?  
>>>       
>
> This would be "allowed_hosts" in the nsca config file.
>
> At this point, It might be good to add the questions:
>
> Have you tried enabling debugging in the nsca config?
> What does your nsca config look like, anyway?
> Can you telnet to port 5667 on the nsca server?
>
> -----Original Message-----
> From: Ian Marks [mailto:imarks at comcast.net] 
> Sent: Friday, May 05, 2006 12:05 PM
> To: Morris, Patrick
> Cc: nagios-users at lists.sourceforge.net
> Subject: Re: [Nagios-users] NSCA Time Out
>
> When I run it manually, it times out after 10 seconds.
> I have iptables allowing port 5667 from the distributed server and no
> tcp wrappers enabled.
> I have enabled debug for nsca on the central server.  According to
> /var/log/messages events are getting to the server, but just not being
> read by nagios.
>
> Morris, Patrick wrote:
>   
>> OK, that still leaves a couple important questions:
>>
>>   
>>     
>>> What happens if you run it manually as the Nagios user?
>>> If standalone, is the nsca server configured to allow connections 
>>> from
>>>     
>>>       
>>   
>>     
>>> your clients? 
>>>     
>>>       
>> -----Original Message-----
>> From: Ian Marks [mailto:imarks at comcast.net]
>> Sent: Friday, May 05, 2006 11:47 AM
>> To: Morris, Patrick
>> Cc: nagios-users at lists.sourceforge.net
>> Subject: Re: [Nagios-users] NSCA Time Out
>>
>> 1.  It times out at 10 seconds.  I also tried setting ocsp_timeout=30.
>> 2.  I'm really not sure what log to look at on the server side, I was 
>> basing the connection established on tcpdump after seeing a handshake 
>> take place.
>> 3.  nsca is running under init.d as a service.
>>
>> Morris, Patrick wrote:
>>   
>>     
>>> What happens if you run it manually as the Nagios user?
>>>
>>> What, if anything, appears in the logs on the server side?
>>>
>>> How are you running nsca?  inetd?  Standalone?
>>>
>>> If standalone, is the nsca server configured to allow connections 
>>> from
>>>     
>>>       
>>   
>>     
>>> your clients?
>>>
>>> Give us something to work with here. 
>>>
>>> -----Original Message-----
>>> From: nagios-users-admin at lists.sourceforge.net
>>> [mailto:nagios-users-admin at lists.sourceforge.net] On Behalf Of Ian 
>>> Marks
>>> Sent: Friday, May 05, 2006 11:20 AM
>>> To: nagios-users at lists.sourceforge.net
>>> Subject: [Nagios-users] NSCA Time Out
>>>
>>> I'm having an issue with nsca in a distributed setup.  I keep getting
>>>       
>
>   
>>> the following error
>>>  "Warning: OCSP command
>>> '/usr/local/nagios/libexec/eventhandlers/submit_check_result_nsca
>>> /host_name/ 'Check Ping Service' OK '$OUTPUT$'' for service 'Check 
>>> Ping Service' on host '/host_name/' timed out after 5 seconds"
>>> I see the initial connection on the central server get established, 
>>> so
>>>     
>>>       
>>   
>>     
>>> I was assuming it was an encryption issue.  For troubleshooting 
>>> purposes, I have disabled encryption, but still see the same error.
>>>
>>> I have the following defined on the
>>> ##distributed server.
>>> in nagios.cfg
>>> obsess_over_services=1
>>> ocsp_command=submit_check_result_nsca
>>>
>>> in checkcommnands.cfg
>>> define command{
>>>         command_name    submit_check_result_nsca
>>>         command_line    
>>> /usr/local/nagios/libexec/eventhandlers/submit_check_result_nsca
>>> $HOSTNAME$ '$SERVICEDESC$' $SERVICESTATE$ '$OUTPUT$'
>>>         }
>>>
>>> ##central server
>>> all services and hosts have been defined for the remote server, nsca 
>>> is running, passive checks are enabled, and iptables rules have been 
>>> set to allow the connection.
>>>
>>>       
>
>
> -------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=k&kid0709&bid&3057&dat1642
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
> ::: Messages without supporting info will risk being sent to /dev/null
>
>   


-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null





More information about the Users mailing list