Router & L3 Device CPU & Memory Utilization

Navdeep Sidhu Navdeep.Sidhu at tatatel.co.in
Wed Apr 18 10:16:53 CEST 2007


Hi

I have installed all the SNMP related plugins at my nagios box.

Now where should I specify SNMP string & other router related
information like hostname?

Thanks in advance.

Regards
Navdeep Singh Sidhu
+91-9216709251

-----Original Message-----
From: nagios-users-bounces at lists.sourceforge.net
[mailto:nagios-users-bounces at lists.sourceforge.net] On Behalf Of
nagios-users-request at lists.sourceforge.net
Sent: Wednesday, April 18, 2007 12:44 AM
To: nagios-users at lists.sourceforge.net
Subject: Nagios-users Digest, Vol 11, Issue 21

Send Nagios-users mailing list submissions to
	nagios-users at lists.sourceforge.net

To subscribe or unsubscribe via the World Wide Web, visit
	https://lists.sourceforge.net/lists/listinfo/nagios-users
or, via email, send a message with subject or body 'help' to
	nagios-users-request at lists.sourceforge.net

You can reach the person managing the list at
	nagios-users-owner at lists.sourceforge.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Nagios-users digest..."


Today's Topics:

   1. nagios checks (Anton Krall)
   2. Re: nagios checks (Morris, Patrick)
   3. StatusMap not Displaying (Simon Marcil)
   4. Re: nagios checks (Thomas Guyot-Sionnest)
   5. status map problem in nagios (Mukta Sharma)
   6. Re: status map problem in nagios (Morris, Patrick)
   7. Snmptrap with Nagios (Aritz.Lazkano at DaimlerChrysler.com)
   8. Re: Snmptrap with Nagios (Michael Schwartzkopff)
   9. Re: Snmptrap with Nagios (Mike Hamrick)
  10. NDUUtils and Statechanges while a Host is DOWN (Wolfgang Powisch)
  11. Re: Snmptrap with Nagios (Thomas Guyot-Sionnest)
  12. R:  parameter inside notifications (Marco Borsani)
  13. Re: Plugin for HP Proliant Hardware Health Monitoring
      (Marcus Fleige)
  14. Router & L3 Device CPU & Memory Utilization (Navdeep Sidhu)
  15. Re: Router & L3 Device CPU & Memory Utilization (chiel)
  16. Re: Plugin for HP Proliant Hardware Health Monitoring (Sim)
  17. hostgroup limit in 1.x? (abid dar)
  18. PDI Power Distribution Unit monitoring (lunaslide)
  19. Re: hostgroup limit in 1.x? (Marc Powell)


----------------------------------------------------------------------

Message: 1
Date: Mon, 16 Apr 2007 19:07:40 -0500
From: "Anton Krall" <akrall-lists at intruder.com.mx>
Subject: [Nagios-users] nagios checks
To: <nagios-users at lists.sourceforge.net>
Message-ID: <01e301c78084$6b0d7170$41285450$@com.mx>
Content-Type: text/plain;	charset="us-ascii"

Guys.. I have some nagios questions.

1. Is there a way to make users that can login thru the web interface
and
check hosts but disable them from getting email notifications of
statuses?

2. I don't know why buyt nagios is checking services too fast for my
taste,
for example, ping service, I check the log and I get the first 

HOST ALERT: ipaq;DOWN;SOFT;1;CRITICAL - Host Unreachable (10.0.0.14)
.
.
HOST ALERT: ipaq;DOWN;HARD;10;CRITICAL - Host Unreachable (10.0.0.14)

SERVICE ALERT: ipaq;ping;CRITICAL;HARD;1;CRITICAL - Host Unreachable
(10.0.0.14)

But from the down soft 1 host  alert to the 10th it only goes by like 1
second... why are those 10 soft check going by that fast?

3. Is there a way to disable hosts up down recovery notifications and
just
let the ping service alert me? Ive noticed that many times I get host
downs
and ups a lot but no ping service notifications.. seems my host check
command is way to sensible... can this be mnodified?

Hope Im not asking too many stupid questions :)

AK





------------------------------

Message: 2
Date: Mon, 16 Apr 2007 20:27:20 -0400
From: "Morris, Patrick" <patrick.morris at hp.com>
Subject: Re: [Nagios-users] nagios checks
To: "Anton Krall" <akrall-lists at intruder.com.mx>,
	<nagios-users at lists.sourceforge.net>
Message-ID:
	
<CD18C81835E18A40A64C4A0D16A237BE06C8BCC0 at ATAEXC01.americas.cpqcorp.net>
	
Content-Type: text/plain;	charset="us-ascii"

> 1. Is there a way to make users that can login thru the web 
> interface and check hosts but disable them from getting email 
> notifications of statuses?

Yes. Set the contacts so they don't receive alerts using
service_notification_options. See the docs about contact configuration
here:

http://nagios.sourceforge.net/docs/2_0/xodtemplate.html#contact

> 2. I don't know why buyt nagios is checking services too fast 
> for my taste, for example, ping service, I check the log and 
> I get the first 
> 
> HOST ALERT: ipaq;DOWN;SOFT;1;CRITICAL - Host Unreachable (10.0.0.14) .
> .
> HOST ALERT: ipaq;DOWN;HARD;10;CRITICAL - Host Unreachable (10.0.0.14)
> 
> SERVICE ALERT: ipaq;ping;CRITICAL;HARD;1;CRITICAL - Host Unreachable
> (10.0.0.14)
> 
> But from the down soft 1 host  alert to the 10th it only goes 
> by like 1 second... why are those 10 soft check going by that fast?

That's normal -- host checks will run serially as fast as they can. See
the docs on host checks here:

http://nagios.sourceforge.net/docs/2_0/checkscheduling.html#host_checks

> 3. Is there a way to disable hosts up down recovery 
> notifications and just let the ping service alert me? Ive 
> noticed that many times I get host downs and ups a lot but no 
> ping service notifications.. seems my host check command is 
> way to sensible... can this be mnodified?

If you don't want host check functionality, use a host check that will
never go down (check_dummy is a good plugin to use for this).



------------------------------

Message: 3
Date: Mon, 16 Apr 2007 20:30:46 -0400
From: "Simon Marcil" <smarcil at s3tech.ca>
Subject: [Nagios-users] StatusMap not Displaying
To: <nagios-users at lists.sourceforge.net>
Message-ID:
	<A115C291F081D74E9869737475F63593293EA2 at svr-exc-01.s3tech.ca>
Content-Type: text/plain; charset="us-ascii"

I have Nagios 2.9 installed on OpenSuSE 10.2. 

 

The following are installed

 

*         lgd 

*         gd-devel 

*         libpng 

*         libpng-devel 

*         libjpeg 

*         libjpeg-devel 

*         zlib 

*         zlib-devel

 

Nagios compiled without errors and statusmap.cgi is present.

 

When i try to access the statusmap page i get the normal page but no
image. I get a square with an X. If i move my mouse around this blank
space (where the image should be) i get the popupswith the host info...

 

Any ideas?

 

Thanks.

 

Simon

-------------- next part --------------
An HTML attachment was scrubbed...

------------------------------

Message: 4
Date: Mon, 16 Apr 2007 20:54:33 -0400
From: Thomas Guyot-Sionnest <dermoth at aei.ca>
Subject: Re: [Nagios-users] nagios checks
Cc: Anton Krall <akrall-lists at intruder.com.mx>,
	nagios-users at lists.sourceforge.net
Message-ID: <46241AC9.6000600 at aei.ca>
Content-Type: text/plain; charset=ISO-8859-1

On 16/04/07 08:27 PM, Morris, Patrick wrote:
>> 1. Is there a way to make users that can login thru the web 
>> interface and check hosts but disable them from getting email 
>> notifications of statuses?
> 
> Yes. Set the contacts so they don't receive alerts using
> service_notification_options. See the docs about contact configuration
> here:
> 
> http://nagios.sourceforge.net/docs/2_0/xodtemplate.html#contact

Names in CGI configuration don't need to be Nagios contacts. The only
difference that I know of it that the CGI will fill-in your name
automatically in commands.

>> 3. Is there a way to disable hosts up down recovery 
>> notifications and just let the ping service alert me? Ive 
>> noticed that many times I get host downs and ups a lot but no 
>> ping service notifications.. seems my host check command is 
>> way to sensible... can this be mnodified?
> 
> If you don't want host check functionality, use a host check that will
> never go down (check_dummy is a good plugin to use for this).

What actually happens when a service go down is that Nagios runs the
Host check and sends a notification only if the host check returns UP.
This way you won't get paged for all services on the host when the host
is down.

Thomas



------------------------------

Message: 5
Date: Tue, 17 Apr 2007 01:24:32 -0400
From: Mukta Sharma <mukta at gwu.edu>
Subject: [Nagios-users] status map problem in nagios
To: nagios-users at lists.sourceforge.net
Message-ID: <de40f1e723eb.462421d0 at gwu.edu>
Content-Type: text/plain; charset=us-ascii

Hi,

I installed the nagios on my system but not able to run the status map,
i tried to run it by installing the gdlib, libpng and libjpeg packages. 

Can anyone please tell me the right procedure to do this.

Some internal server error is coming when i clicked on the statusmap.

Thanks and Regards

Mukta Sharma
M.S Student, Computer Science.
The George Washington University



------------------------------

Message: 6
Date: Tue, 17 Apr 2007 01:53:04 -0400
From: "Morris, Patrick" <patrick.morris at hp.com>
Subject: Re: [Nagios-users] status map problem in nagios
To: "Mukta Sharma" <mukta at gwu.edu>,
	<nagios-users at lists.sourceforge.net>
Message-ID:
	
<CD18C81835E18A40A64C4A0D16A237BE06C8BD6A at ATAEXC01.americas.cpqcorp.net>
	
Content-Type: text/plain;	charset="us-ascii"

> I installed the nagios on my system but not able to run the 
> status map, i tried to run it by installing the gdlib, libpng 
> and libjpeg packages. 
> 
> Can anyone please tell me the right procedure to do this.
> 
> Some internal server error is coming when i clicked on the statusmap.

Which error?



------------------------------

Message: 7
Date: Tue, 17 Apr 2007 08:54:22 +0200
From: Aritz.Lazkano at DaimlerChrysler.com
Subject: [Nagios-users] Snmptrap with Nagios
To: nagios-users at lists.sourceforge.net
Message-ID:
	
<OF16DA18F1.46E2062B-ONC12572C0.0025E635-C12572C0.0025F00C at dcx.dcx>
Content-Type: text/plain; charset="us-ascii"

Hello.

I have to monitor a "thing" that works with snmptraps, but I don`t know 
what I have to do.
I have read something about check_dummy        How is it works?
And then what i have to do, Create a service with passice_ check
activate, 
and using the check_dummy command?
Thanks,
-------------- next part --------------
An HTML attachment was scrubbed...

------------------------------

Message: 8
Date: Tue, 17 Apr 2007 09:08:38 +0200
From: Michael Schwartzkopff <misch at multinet.de>
Subject: Re: [Nagios-users] Snmptrap with Nagios
To: nagios-users at lists.sourceforge.net
Message-ID: <200704170908.38881.misch at multinet.de>
Content-Type: text/plain;  charset="utf-8"

Am Dienstag, 17. April 2007 08:54 schrieb
Aritz.Lazkano at daimlerchrysler.com:
> Hello.
>
> I have to monitor a "thing" that works with snmptraps, but I don`t
know
> what I have to do.
> I have read something about check_dummy        How is it works?
> And then what i have to do, Create a service with passice_ check
activate,
> and using the check_dummy command?
> Thanks,

see:

http://nagios.sourceforge.net/docs/3_0/int-snmptrap.html

-- 
Dr. Michael Schwartzkopff
MultiNET Services GmbH
Addresse: Bretonischer Ring 7; 85630 Grasbrunn; Germany
Tel: +49 - 89 - 45 69 11 0
Fax: +49 - 89 - 45 69 11 21
mob: +49 - 174 - 343 28 75

mail: misch at multinet.de
web: www.multinet.de

Sitz der Gesellschaft: 85630 Grasbrunn
Registergericht: Amtsgericht M?nchen HRB 114375
Gesch?ftsf?hrer: G?nter Jurgeneit, Hubert Martens

---

PGP Fingerprint: F919 3919 FF12 ED5A 2801 DEA6 AA77 57A4 EDD8 979B
Skype: misch42



------------------------------

Message: 9
Date: Tue, 17 Apr 2007 00:14:13 -0700
From: Mike Hamrick <mikeh at muppetlabs.com>
Subject: Re: [Nagios-users] Snmptrap with Nagios
To: Aritz.Lazkano at DaimlerChrysler.com
Cc: nagios-users at lists.sourceforge.net
Message-ID: <200704170714.l3H7EDOp025070 at muppetlabs.com>


> I have to monitor a "thing" that works with snmptraps, but I don`t
know 
> what I have to do.

You need to have a machine that listens for SNMP traps.  The program
snmptrapd does this, it comes with net-snmp package.  This daemon
writes the trap info to the system log, or alternately runs a 
program and passes it the trap information.  That program can then
submit a check to nagios using NSCA or by writing to the nagios.cmd
pipe.

I found this article to be very helpful:

http://www.samag.com/documents/s=9559/sam0503g/

Mike





------------------------------

Message: 10
Date: Tue, 17 Apr 2007 09:19:27 +0200
From: Wolfgang Powisch <powo+lists.nagios-users at powo.priv.at>
Subject: [Nagios-users] NDUUtils and Statechanges while a Host is DOWN
To: nagios-users at lists.sourceforge.net
Message-ID: <462474FF.7090208 at powo.priv.at>
Content-Type: text/plain; charset=ISO-8859-15; format=flowed

Hello,

I've built a custom Web-Interface which generates
Service-Availability Reports from Nagios/NDO Database.

I'm using the tables nagios_servicestatus to determine
the current state and nagios_statehistory to read out
the history of a specific service.

Today I noticed, that there are no entries for a specific
Service in the  statehistory table while the host has been
considered as DOWN. so I couldn't see an outage (which effected
the complete host) in the Service-Availability-Report.

Is this an expected behaviour, that this state-changes are
not send to NDO ? (If yes, can you explain the reason)

What will be the correct way to query Availability and outages
of a single service ?

--
best regards, Wolfgang Powisch




------------------------------

Message: 11
Date: Tue, 17 Apr 2007 03:23:10 -0400
From: Thomas Guyot-Sionnest <dermoth at aei.ca>
Subject: Re: [Nagios-users] Snmptrap with Nagios
To: Aritz.Lazkano at DaimlerChrysler.com
Cc: nagios-users at lists.sourceforge.net
Message-ID: <462475DE.8040000 at aei.ca>
Content-Type: text/plain; charset=ISO-8859-1

On 17/04/07 02:54 AM, Aritz.Lazkano at DaimlerChrysler.com wrote:
> 
> Hello.
> 
> I have to monitor a "thing" that works with snmptraps, but I don`t
know
> what I have to do.
> I have read something about check_dummy        How is it works?
> And then what i have to do, Create a service with passice_ check
> activate, and using the check_dummy command?

First you need a trap handler properly set up to return passive results.
I use SNMPTT (http://www.snmptt.org/) though you may want to look at
OpsView (http://www.opsview.org/) as is seems to do a great job at
simplifying the trap setup.

Then you set up the service as "volatile". People usually disable active
checks and use freshness checking to get the trap reset automatically
after some time. If you rather want the service to stay in a non-OK
state until someone change it you can make it active (It won't be
scheduled if volatile) and have someone force an active check to reset
the trap.

In either case it the check command should looks like:

check_command  check_dummy!0!Trap reset on $LONGDATETIME$

and check_dummy should run something like:

$USER1$/check_dummy $ARG1$ $ARG2$

Thomas



------------------------------

Message: 12
Date: Tue, 17 Apr 2007 09:31:41 +0200
From: "Marco Borsani" <m.borsani at it.net>
Subject: [Nagios-users] R:  parameter inside notifications
To: "'Kyle O'Donnell'" <kyle.odonnell at gmail.com>
Cc: nagios-users at lists.sourceforge.net
Message-ID: <005701c780c2$71ec70c0$0900d40a at intranet.it.net>
Content-Type: text/plain;	charset="iso-8859-1"

That macro could be ok, but I am running Nagios 1.4, not Nagios 2.0



-----Messaggio originale-----
Da: kyleodonnell at gmail.com [mailto:kyleodonnell at gmail.com] Per conto di
Kyle
O'Donnell
Inviato: luned? 16 aprile 2007 18.28
A: Marco Borsani
Cc: nagios-users at lists.sourceforge.net
Oggetto: Re: [Nagios-users] parameter inside notifications

Check the the nagios macros definitions:

http://nagios.sourceforge.net/docs/2_0/macros.html

$SERVICECHECKCOMMAND$ might meed your needs.

--Kyle
On 4/16/07, Marco Borsani <m.borsani at it.net> wrote:
>
>
> Hi all !
>
>
>
> I'd like to insert the command parameters inside the notifications.
>
>
>
> Reading the manual it does not seem possible, is it corrects ?
>
>
>
> Marco Borsani
> Technical Operation
>
> tel.:    +390104310115
> e-fax: +390683175950
> *       m.borsani at it.net
>
> ITnet S.r.l.
> Direzione e Coordinamento di Wind Telecomunicazioni S.p.A.
> Via Pacinotti, 39
> 16151 - Genova
>
>
> In ottemperanza al D. lgs 196/03 in materia di protezione dei dati
> personali, le informazioni contenute in questo messaggio sono
strettamente
> riservate e sono esclusivamente indirizzate al destinatario indicato
(oppure
> alla persona responsabile di rimetterlo al destinatario). Qualsiasi
uso,
> riproduzione o divulgazione di questo messaggio ? vietata. Nel caso in
cui
> aveste ricevuto questa mail per errore, Vi invitiamo ad avvertire il
> mittente al pi? presto a mezzo posta elettronica e distruggere il
messaggio
> erroneamente ricevuto.
>
> According to Italy's new data protection code (Legislative Decree no.
> 196/2003) in force on January 1st 2004, Italian Law 196/03 concerning
> privacy, the information contained in this e-mail is confidential and
is
> intended for the addressee only. If you are not the correct recipient,
> please note that any use, dissemination or copy of this
document/information
> is strictly prohibited.If you have received this message in error, you
> should destroy it and please notify us immediately by e-mail.
>
>
>
>




------------------------------

Message: 13
Date: Tue, 17 Apr 2007 11:02:06 +0200
From: Marcus Fleige <marcus.fleige at de.rhenus.com>
Subject: Re: [Nagios-users] Plugin for HP Proliant Hardware Health
	Monitoring
To: Gerhard Lausser <Gerhard.Lausser at consol.de>
Cc: nagios-users at lists.sourceforge.net
Message-ID: <46248D0E.20007 at de.rhenus.com>
Content-Type: text/plain; charset=UTF-8; format=flowed

Hey,

Gerhard Lausser schrieb am 16.04.2007 17:15 Uhr:
> Hi Marcus,
> 
> i can understand, not-so-important servers are not fully equipped. 
> I will introduce an option like "-b ps:3,..." to blacklist the named
> components (skip checking power supply #3 in this example).
> 
> Maybe by the end of the week. Keep an eye on
> http://www.consol.com/opensource/nagios/check-hpasm (the broken
download
> link has been fixed). 

Great, thanks a lot! After that is finished, i'm looking forward to 
deploy the check throughout my network. :-)

Regards,

Marcus Fleige




------------------------------

Message: 14
Date: Tue, 17 Apr 2007 14:32:37 +0530
From: "Navdeep Sidhu" <Navdeep.Sidhu at tatatel.co.in>
Subject: [Nagios-users] Router & L3 Device CPU & Memory Utilization
To: <nagios-users at lists.sourceforge.net>
Message-ID:
	
<745C9242AACB2D468091BC33BFD668D002B4CDF6 at pb-chd-mbx01.pjb.ttsl.com>
Content-Type: text/plain; charset="us-ascii"

Hi
 
I'm using Nagios 2.8 version & right now I'm using Nagios to monitor the
server resources like HDD, CPU, Memory & Ping etc.
 
Now I want to monitor router & layer 3 CPU & memory utilization.

So please suggest me the way forward.
 
Thanks in advance.
Navdeep




======================================
i-choose online store at www.tataindicom.com
Your Comfort.Your Convenience.YourChoice.
====================================== 

DISCLAIMER:
The information contained in this message (including any attachments) is
confidential and may be privileged. If you have received it by mistake
please notify the sender by return e-mail and permanently delete this
message and any attachments from your system. Any dissemination, use,
review, distribution, printing or copying of this message in whole or in
part is strictly prohibited. Please note that e-mails are susceptible to
change.TATATELESERVICES LTD. (including its group companies) shall not
be liable for the improper or incomplete transmission of the information
contained in this communication nor for any delay in its receipt or
damage to your system. TATA TELESERVICES LTD. (or its group companies)
does not guarantee that the integrity of this communication has been
maintained nor that this communication is free of viruses, interceptions
or interference.
-------------- next part --------------
An HTML attachment was scrubbed...

------------------------------

Message: 15
Date: Tue, 17 Apr 2007 12:02:43 +0200
From: "chiel" <chiel at gmx.net>
Subject: Re: [Nagios-users] Router & L3 Device CPU & Memory
	Utilization
To: <nagios-users at lists.sourceforge.net>
Message-ID: <006f01c780d7$8ddaa8f0$760010ac at michiel>
Content-Type: text/plain; charset="iso-8859-1"

Router & L3 Device CPU & Memory UtilizationYou can use check_snmp and
provide the MIB.
Or take a look at the following website: http://nagios.manubulon.com/
It has some standard scripts that check the cpu/mem/interface for a
router.

  ----- Original Message ----- 
  From: Navdeep Sidhu 
  To: nagios-users at lists.sourceforge.net 
  Sent: Tuesday, April 17, 2007 11:02 AM
  Subject: [Nagios-users] Router & L3 Device CPU & Memory Utilization


  Hi



  I'm using Nagios 2.8 version & right now I'm using Nagios to monitor
the server resources like HDD, CPU, Memory & Ping etc.



  Now I want to monitor router & layer 3 CPU & memory utilization.

  So please suggest me the way forward.



  Thanks in advance.

  Navdeep



  ======================================
  i-choose online store at www.tataindicom.com
  Your Comfort.Your Convenience.YourChoice.
  ======================================

  DISCLAIMER:
  The information contained in this message (including any attachments)
is confidential and may be privileged. If you have received it by
mistake please notify the sender by return e-mail and permanently delete
this message and any attachments from your system. Any dissemination,
use, review, distribution, printing or copying of this message in whole
or in part is strictly prohibited. Please note that e-mails are
susceptible to change.TATATELESERVICES LTD. (including its group
companies) shall not be liable for the improper or incomplete
transmission of the information contained in this communication nor for
any delay in its receipt or damage to your system. TATA TELESERVICES
LTD. (or its group companies) does not guarantee that the integrity of
this communication has been maintained nor that this communication is
free of viruses, interceptions or interference. 



------------------------------------------------------------------------
------


 
------------------------------------------------------------------------
-
  This SF.net email is sponsored by DB2 Express
  Download DB2 Express C - the FREE version of DB2 express and take
  control of your XML. No limits. Just data. Click to get it now.
  http://sourceforge.net/powerbar/db2/


------------------------------------------------------------------------
------


  _______________________________________________
  Nagios-users mailing list
  Nagios-users at lists.sourceforge.net
  https://lists.sourceforge.net/lists/listinfo/nagios-users
  ::: Please include Nagios version, plugin version (-v) and OS when
reporting any issue. 
  ::: Messages without supporting info will risk being sent to /dev/null
-------------- next part --------------
An HTML attachment was scrubbed...

------------------------------

Message: 16
Date: Tue, 17 Apr 2007 15:22:18 +0200
From: Sim <simvirus at gmail.com>
Subject: Re: [Nagios-users] Plugin for HP Proliant Hardware Health
	Monitoring
To: Gerhard.Lausser at consol.de, nagios-users at lists.sourceforge.net
Message-ID:
	<d3e73af70704170622q256d6e81v6be7c29765893078 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I have this problem, I can run check_hpasm only once:

Thanks for reply

----------------------------------------------
# service hpasm start
   Starting Proliant System Health Monitor (hpasmd):            [
SUCCESS ]

Starting Foundation Agents (cmafdtn): cmathreshd cmahostd cmapeerd
   Starting Threshold agent (cmathreshd):               [ SUCCESS ]

   Starting Host agent (cmahostd):              [ SUCCESS ]

   Starting SNMP Peer (cmapeerd):               [ SUCCESS ]


Starting Server Agents (cmasvr): cmastdeqd cmahealthd cmaperfd
   Starting Standard Equipment agent (cmastdeqd):               [
SUCCESS ]

   Starting Health agent (cmahealthd):          [ SUCCESS ]

   Starting Performance agent (cmaperfd):               [ SUCCESS ]


Starting Storage Agents (cmastor): cmaeventd cmaidad cmafcad cmaided
cmascsid cmasasd
   Starting Storage Event Logger (cmaeventd):           [ SUCCESS ]

   Starting IDA agent (cmaidad):                [ SUCCESS ]

   Starting FCA agent (cmafcad):                [ SUCCESS ]

   Starting IDE agent (cmaided):                [ SUCCESS ]

   Starting SCSI agent (cmascsid):              [ SUCCESS ]

   Starting SAS agent (cmasasd):                [ SUCCESS ]


hpasm:  Server Management is enabled

----------------------------------------------

# ./check_hpasm -v
checking hpasmd process
System        :proliant dl380 g4
[...]
 dimm 1 at 0 is ok
 dimm 2 at 0 is ok
OK - hardware working fine

----------------------------------------------

# ./check_hpasm -v
checking hpasmd process
UNKNOWN - multiple hpasmd procs

----------------------------------------------



------------------------------

Message: 17
Date: Tue, 17 Apr 2007 11:39:38 -0700 (PDT)
From: abid dar <snyper9311 at yahoo.com>
Subject: [Nagios-users] hostgroup limit in 1.x?
To: Nagios-users at lists.sourceforge.net
Message-ID: <543546.95201.qm at web36811.mail.mud.yahoo.com>
Content-Type: text/plain; charset=ascii

I tried searching online but could not find out if there is a limit to
number of hosts that can be added to a particular hostgroup in nagios
1.x ?



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 



------------------------------

Message: 18
Date: Tue, 17 Apr 2007 11:50:12 -0700
From: lunaslide <lunaslide at 23.org>
Subject: [Nagios-users] PDI Power Distribution Unit monitoring
To: nagios-users at lists.sourceforge.net
Message-ID: <462516E4.3050501 at 23.org>
Content-Type: text/plain; charset=ISO-8859-1

I'm seeking information on monitoring power distribution units
manufactured by Power Distribution, Inc. (PDI) in our data center.  I've
been searching around and there is little to find.  If anyone is doing
this with Nagios I'd love to hear about it.



------------------------------

Message: 19
Date: Tue, 17 Apr 2007 13:58:44 -0500
From: "Marc Powell" <marc at ena.com>
Subject: Re: [Nagios-users] hostgroup limit in 1.x?
To: <Nagios-users at lists.sourceforge.net>
Message-ID: <A7B0A9F02975A74A845FE85D0B95B8FA07562348 at misex01.ena.com>
Content-Type: text/plain;	charset="US-ASCII"



> -----Original Message-----
> From: nagios-users-bounces at lists.sourceforge.net [mailto:nagios-users-
> bounces at lists.sourceforge.net] On Behalf Of abid dar
> Sent: Tuesday, April 17, 2007 1:40 PM
> To: Nagios-users at lists.sourceforge.net
> Subject: [Nagios-users] hostgroup limit in 1.x?
> 
> I tried searching online but could not find out if there is a limit to
> number of hosts that can be added to a particular hostgroup in nagios
1.x
> ?

Indirectly, yes. There's no limit to the number of hosts but there is a
limit to the number of characters per line of config file that nagios
will read in. The default, MAX_XODTEMPLATE_INPUT_BUFFER in
xdata/xodtemplate.h, is 8196 characters under nagios-1. I've had success
in the past increasing that to 65535 and have had some _very_ long
hostgroup members lines. In fact, that's what the default is in
nagios-2.

--
Marc



------------------------------

------------------------------------------------------------------------
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

------------------------------

_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users


End of Nagios-users Digest, Vol 11, Issue 21
********************************************
======================================
i-choose online store at www.tataindicom.com
Your Comfort.Your Convenience.YourChoice.
====================================== 

DISCLAIMER:
The information contained in this message (including any attachments) is confidential and may be privileged. If you have received it by mistake please notify the sender by return e-mail and permanently delete this message and any attachments from your system. Any dissemination, use, review, distribution, printing or copying of this message in whole or in part is strictly prohibited. Please note that e-mails are susceptible to change.TATATELESERVICES LTD. (including its group companies) shall not be liable for the improper or incomplete transmission of the information contained in this communication nor for any delay in its receipt or damage to your system. TATA TELESERVICES LTD. (or its group companies) does not guarantee that the integrity of this communication has been maintained nor that this communication is free of viruses, interceptions or interference.

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null





More information about the Users mailing list