NRPE: Command 'check_swap' not defined
yu-ting_liu at agilent.com
yu-ting_liu at agilent.com
Wed May 2 11:23:37 CEST 2007
Hi,
No, I even can't run check_nrpe command successfully in command line. Below is the running command and output:
-sh-3.00$ ./check_nrpe -H remote_client_name -c check_load
NRPE: Command 'check_load' not defined
I've turned on the debug in my remote client nrpe.cfg file but no message outputs to my system log file at all - /var/adm/syslog/syslog.log. That's also puzzle me. I'm using nrpe.cfg sample file to config and nrpe daemon is running as below on the client.
nagios 14891 1 0 16:18:47 ? 0:00 /usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d
Regards,
Yu Ting
-----Original Message-----
From: tom.welsh at bt.com [mailto:tom.welsh at bt.com]
Sent: Wednesday, May 02, 2007 5:01 PM
To: yu-ting_liu at agilent.com
Cc: nagios-users at lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE: Command 'check_swap' not defined
Hi
When you run the command manually does it work?
Here is what I get when I run my command
nagios at usel:/usr/local/nagios/libexec> ./check_nrpe -H test_server_1 -c check_load OK - load average: 1.09, 1.04, 1.01|load1=1.090;15.000;30.000;0; load5=1.040;10.000;25.000;0; load15=1.010;5.000;20.000;0;
Can you run the command and post the output if you are still getting problems?
Have you turned on debugging on the nrpe.cfg file and looked at the output when you have ran the command. This is very helpful diagnostic tool.
Here is the output from /var/log/messages with debug turned on in nrpe.cfg
May 2 09:59:34 h12oiap nrpe[4469]: Host is asking for command 'check_load' to be run...
May 2 09:59:34 h12oiap nrpe[4469]: Running command:
/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20 May 2 09:59:34 h12oiap nrpe[4469]: Command completed with return code 0 and output: OK - load average: 0.17, 0.15, 0.10|load1=0.170;15.000;30.000;0; load5=0.150;10.000;25.000;0; load15=0.100;5.000;20.000;0; May 2 09:59:34 h12oiap nrpe[4469]: Return Code: 0, Output: OK - load
average: 0.17, 0.15, 0.10|load1=0.170;15.000;30.000;0; load5=0.150;10.000;25.000;0; load15=0.100;5.000;20.000;0;
What do you get when you run yours?
Regards
Tom
-----Original Message-----
From: yu-ting_liu at agilent.com [mailto:yu-ting_liu at agilent.com]
Sent: 02 May 2007 09:50
To: Welsh,T,Tom,XSL4A C
Cc: nagios-users at lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE: Command 'check_swap' not defined
Hi, all,
I just manually run command for testing purpose on my monitor server:
/usr/local/nagios/check_nrpe -H remote_host_name -c check_load
I've not configured it in Nagios configuration files yet.
Regards,
Yu Ting
-----Original Message-----
From: tom.welsh at bt.com [mailto:tom.welsh at bt.com]
Sent: Wednesday, May 02, 2007 4:36 PM
To: yu-ting_liu at agilent.com; nagios-users at lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE: Command 'check_swap' not defined
Is the check load command specified on the nagios monitoring box
Here is how my config is defined.
Remote nrpe box. /usr/local/etc/nrpe.cfg
command[check_load]=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20
>From nagios monitoring box. /usr/local/nagios/etc/checkcommands.cfg
# ' check load on remote systems using nrpe define command{
command_name check_nrpe_load
command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
}
This works fine for me.
Regards
Tom
-----Original Message-----
From: nagios-users-bounces at lists.sourceforge.net
[mailto:nagios-users-bounces at lists.sourceforge.net] On Behalf Of yu-ting_liu at agilent.com
Sent: 02 May 2007 09:26
To: nagios-users at lists.sourceforge.net
Subject: [Nagios-users] NRPE: Command 'check_swap' not defined
Hi,
I've run into following NRPE issue.
NRPE: Command 'check_load' not defined
I've checked my remote client nrpe.cfg and the command definition is properly configured there.
command[check_load]=/usr/local/nagios/libexec/check_load -w
15,10,5 -c 30,25,20
...
Does anybody know what reason else can cause such issue? Thanks in advance.
Regards,
Yu Ting
------------------------------------------------------------------------
-
This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits.
Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null
More information about the Users
mailing list