[naemon-users] naemon Startup very slow

[Sven Nierlein]

Hi Jörg,

Sry, i forgot to set the list on cc. So here we are again...

You could run "naemon -T tmp/naemon/naemon.cfg" directly as site user. But it seems
like its the amount of dependencies. You could also try the "-x" switch. Although its
deprecated and i have no idea if it changes anything anymore.

Cheers,
 Sven


On 01/06/17 10:56, Kottmann, Jörg wrote:
> Hi Sven,
>
> this was the highest debug level. We have many Service dependencys defined, which increases the
> startup time, but i think 15 min are too long.
>
> If I trace the process, I only see brk requests like the follow
> brk(0x907c000)                          = 0x907c000
>
> This takes ca. 5 min, after then the naemon service is started ( omd start core comes back with ok ). 
> And then it takes about 10 min till naemon starts loading the modules or checking services.
> This trace of the prozess doesn`t output anything and the CPU use is 99%
>
> If tried it without the moduls, with no change.
> The Server has 12 CPUs and 18 GB RAM
>
> Regards,
> Jörg 
>
> -----Ursprüngliche Nachricht-----
> Von: Sven Nierlein [mailto:Sven.Nierlein at Consol.de] 
> Gesendet: Donnerstag, 1. Juni 2017 10:34
> An: Kottmann, Jörg <joerg.kottmann at gkvi.de>
> Betreff: Re: [naemon-users] naemon Startup very slow
>
> Hi Jörg,
>
> does it start normal without the modules? Could you increase the debug level even more to see where it takes too long?
> Gearman and Livestatus are quite common combination and i haven't experienced such issues anywhere yet.
>
> Cheers,
>  Sven
>
>
> On 01/06/17 10:15, Kottmann, Jörg wrote:
>> Hi,
>>
>>  
>>
>> I’m testing naemon 1.0.6 under omd-lab, but naemon startup takes about 15 min. Any suggestions why ?
>>
>>  
>>
>> Here is the debug log:
>>
>> [1496228876.626186] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.626228] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.626236] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.626241] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.626252] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628226] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628267] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628302] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628334] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628361] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628384] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628408] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628434] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628467] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628492] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628516] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628548] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628620] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628682] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628815] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628885] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.628926] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496228876.629145] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496229774.828030] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496229774.828066] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496229774.828074] [064.0] [pid=22475] Module '/omd/sites/prod/lib/mod_gearman/mod_gearman_naemon.o' loaded with return code of '0'
>>
>> [1496229774.828078] [064.0] [pid=22475] nebmodule_deinit() found
>>
>> [1496229774.829615] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496229774.833062] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496229774.833069] [064.2] [pid=22475] Callback #1 (type 2) return code = 0
>>
>> [1496229774.833077] [064.1] [pid=22475] Making callbacks (type 2)...
>>
>> [1496229774.833081] [064.2] [pid=22475] Callback #1 (type 2) return code = 0
>>
>> [1496229774.833085] [064.0] [pid=22475] Module '/omd/sites/prod/lib/naemon/livestatus.o' loaded with return code of '0'
>>
>>  
>>
>> Between the start and the load of the last modul is a time difference of 15 minutes.
>>
>>  
>>
>> Regards,
>>
>> Joerg
>>
>>  
>>
>


-- 
Sven Nierlein             Sven.Nierlein at consol.de
ConSol* GmbH              http://www.consol.de
Franziskanerstrasse 38    Tel.:089/45841-439
81669 Muenchen            Fax.:089/45841-111