Problem with check_ftp and check_pop

[Jasmine Chua]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Try to test it without your Nagios server.. with -v option to debug it. 

On Saturday 14 December 2002 03:19, Jasmine Chua wrote:
> Try the CVS release.
> Yes they are all linked to check_tcp but running on different ports. Since
> the rest of them are working, I dont see why you cant run check_ftp.
>
> On Saturday 14 December 2002 03:02, you wrote:
> > I did configure the plugins with the prefix, cgibin, and http directives
> > pointing to the correct location.  Everything else seems to work just
> > fine, including check_tcp.  I should ask that, in my system check_ftp,
> > check_imap, check_nntp and check_pop are all symlinked to check_tcp.  Is
> > that correct?  Anyway, everything else seems to work fine as far as the
> > plugins.
> >
> > Dan
> >
> > -----Original Message-----
> > From: Jasmine Chua [mailto:jasmine.chua at securecirt.com]
> > Sent: Friday, December 13, 2002 12:58 PM
> > To: nagios-users at lists.sourceforge.net
> > Cc: Dan Spray
> > Subject: Re: [Nagios-users] Problem with check_ftp and check_pop
> >
> > maybe because its not locating "utils.pm".
> >
> > use "/usr/local/nagios/libexec";
> >
> > use utils qw (.....);
> >
> >  > Read the INSTALL file. Make sure you set the -PREFIXthingy
> >  > to your nagios install, and set the -CGIPATHthingy to /nagios/cgi-bin
> >  > (if you installed nagios with defaults). That's in ./configure
> >  >
> >  > After that run "make"
> >  > Then "make install"
> >  >
> >  > Plugins should now be under /somedir/nagios/libexec
> >
> > On Saturday 14 December 2002 02:38, you wrote:
> > > I am using nagios-plugins-1.3.0-beta2.tar.gz on RH 7.3.  What
> >
> > libraries
> >
> > > are you talking about?
> > >
> > > -----Original Message-----
> > > From: Jasmine Chua [mailto:jasmine.chua at securecirt.com]
> > > Sent: Friday, December 13, 2002 12:36 PM
> > > To: nagios-users at lists.sourceforge.net
> > > Cc: Dan Spray
> > > Subject: Re: [Nagios-users] Problem with check_ftp and check_pop
> > >
> > > Check to see if the libraries are there.
> > >
> > > What version of plugins are you running? And on what O/S?
> > >
> > > On Saturday 14 December 2002 02:29, you wrote:
> > > > I did a configured them, made them, and a make install.  Is there
> > > > something I'm missing in there?
> > > >
> > > > -----Original Message-----
> > > > From: Jasmine Chua [mailto:jasmine.chua at securecirt.com]
> > > > Sent: Friday, December 13, 2002 12:27 PM
> > > > To: nagios-users at lists.sourceforge.net
> > > > Cc: Dan Spray
> > > > Subject: Re: [Nagios-users] Problem with check_ftp and check_pop
> > > >
> > > > Looks like you dint compile your plugins properly.
> > > >
> > > > On Saturday 14 December 2002 02:08, Dan Spray wrote:
> > > > > Hello all,
> > > > >
> > > > > I just started using check_ftp and check_pop for a couple of
> > >
> > > servers.
> > >
> > > > I
> > > >
> > > > > set it all up and Nagios seems to like my commands and all,
> >
> > however,
> >
> > > > > under Service Detail it says "(No output!) " so I said okay and
> >
> > ran
> >
> > > it
> > >
> > > > > from the command line, here is what I get:
> > > > >
> > > > > [root at NABU libexec]# ./check_ftp -H nabu
> > > > > FTP OK -   0.001 second response time on port 21|time=  0.001
> > > > > Segmentation fault
> > > > >
> > > > > Anyone have any ideas on this?  Thanks inadvance,
> > > > >
> > > > > Dan

- -- 
Jasmine Chua
Security Engineer, SecureCiRT (A SBU of Z-Vance Pte Ltd)
http://www.securecirt.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE9+jVxNgvTa7Hj2AURAvVwAJsEUlEjxApVndROXg7g+QSHL5uWHQCgkY5T
2WVHRpsorDQoxjOLbY+F4fU=
=al89
-----END PGP SIGNATURE-----



-------------------------------------------------------
This sf.net email is sponsored by:
With Great Power, Comes Great Responsibility 
Learn to use your power at OSDN's High Performance Computing Channel
http://hpc.devchannel.org/