Disk Usage Counter

[Kaplan, Andrew H.]

Hi J,

When run with the -V option I get the following:

	CHECK_DISK (NAGIOS-PLUGINS 1.3.0-ALPHA1) 1.2


-----Original Message-----
From: Jeremy Tinley [mailto:jtinley at unirez.com]
Sent: Wednesday, September 25, 2002 4:05 PM
To: Kaplan, Andrew H.
Subject: RE: [Nagios-users] Disk Usage Counter


What output do you get when you run the check_disk command from the
command line?

-J

-----Original Message-----
From: nagios-users-admin at lists.sourceforge.net
[mailto:nagios-users-admin at lists.sourceforge.net] On Behalf Of Kaplan,
Andrew H.
Sent: Wednesday, September 25, 2002 2:56 PM
To: nagios-users at lists.sourceforge.net
Subject: [Nagios-users] Disk Usage Counter

Hi there,

I am using the Disk Usage counter on three machines: the first two are
Red
Hat 7.3 machines. The first is running on three disks that are
configured
via a hard disk array. The file name for the array disk is /dev/sda
while
the second machine is on a single hard drive and its filename is
/dev/hda1.
The third machine an HP-UX 10.20 workstation, and its disk file name is
/dev/vg00. When the counters are displayed on the web page, the
diskarray
machine has an unknown status and does not show any disk usage while the
the
other two machines show a disk usage of 87024kB (90%) free. I have
checked
the filesystems on both of these machines, and have confirmed that
readout
is inaccurate. Is there an additional setting that I need to configure?


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf