Configuring still

[Jeff Lane]

Oddly enough, I tried changing the command bit to mysqld and it 
worked... weird...  and changing it to just safe_mysqld worked as well...

Here is another problem however...

I have also put nrpe on a web server and I am getting problems iwth the 
checks timing out automatically...

Here is what the GUI shows:
webgnostics


Cobalt Admin Status
CRITICAL     04-18-2003 14:26:25     0d 0h 38m 1s     3/3 
CHECK_NRPE: Socket timeout after 10 seconds.

Current Load
CRITICAL     04-18-2003 14:26:48     0d 0h 37m 41s     3/3 
CHECK_NRPE: Socket timeout after 10 seconds.

Current Users
CRITICAL     04-18-2003 14:27:10     0d 0h 37m 11s     3/3 
CHECK_NRPE: Socket timeout after 10 seconds.


and there are many others... what causes this?  If I run the check_nrpe 
commands by hand, each and every one works perfectly... HOWEVER when 
they are run by nagios automatically, they all fail...

This failure is ONLY occuring for this one host.  I checked service.cfg 
and hosts.cfg and everthing seems to be correct in each of them

Any thoughts?

Jeff

Subhendu Ghosh wrote:

 > You should be able to use "-C /bin/sh -a /usr/bin/safe_mysqld"
 >
 > note the ps on the command line probably has different defaults than 
ps in check_procs.  Take look at your config.h for PS_COMMAND.
 >





-- 
Jeffrey Lane
ConnectNC.com / Internet of the Sandhills
W4KDH at arrl.net

chown -r us:us /yourbase/




-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null