Problems with Nagios 1.0 on Red Hat 8.0 [Solut ion]

[Chris Losch]

I finally got some time to try, this and it works... (fixes the "Could not
stat()" problem) - If only i had tried this earlier, would have saved a lot
of time, and pulled hair!
 
Thanks

-----Original Message-----
From: Volker.Aust at premiere.de [mailto:Volker.Aust at premiere.de]
Sent: 06 January 2003 17:16
To: nagios-users at lists.sourceforge.net
Cc: AHKAPLAN at PARTNERS.ORG
Subject: RE: [Nagios-users] Problems with Nagios 1.0 on Red Hat 8.0


IIRC the command is "make install-commandmode".
 
-vol

-----Original Message-----
From: Kaplan, Andrew H. [mailto:AHKAPLAN at PARTNERS.ORG]
Sent: Monday, January 06, 2003 4:33 PM
To: 'Russell Scibetti'
Cc: 'nagios-users at lists.sourceforge.net'
Subject: RE: [Nagios-users] Problems with Nagios 1.0 on Red Hat 8.0


Chris,
 
What is the complete syntax of the make install-mode command? Simply typing
make install-mode results in a 
 
No rule to make target 'install-mode'. Stop error message.
 
Thanks.

-----Original Message-----
From: Russell Scibetti [mailto:russell at quadrix.com]
Sent: Friday, January 03, 2003 10:16 AM
To: Chris Losch
Cc: 'nagios-users at lists.sourceforge.net'
Subject: Re: [Nagios-users] Problems with Nagios 1.0 on Red Hat 8.0


Did you make sure that:

1.  In the installation phase, you ran "make install-mode"
2.  The user that the apache runs as has permissions to write to nagios.cmd
(usually done by added the "webserver" user to whatever group  nagios.cmd is
set to)

Just some suggestions of things to double check.

Russell Scibetti

Chris Losch wrote:


Did you encounter any of the problems mentioned in the thread mentioned
below (i.e.) recieving the "Could not stat() command file" error, when
trying to use the web interface to commit changes, schedule checks, enter
downtime etc. etc.

I have the rest of the Nagios functions working perfectly well, using the
default (full) install of RH8 and nagios 1.0. (no CVS components)

Chris
-----Original Message-----
From: donavan nelson [ mailto:donavan at 4wx.net <mailto:donavan at 4wx.net>  ]
Sent: 02 January 2003 20:20
To: Chris Losch; ' nagios-users at lists.sourceforge.net
<mailto:nagios-users at lists.sourceforge.net> '
Subject: RE: [Nagios-users] Problems with Nagios 1.0 on Red Hat 8.0


I have nagios running just fine on redhat 8.0.  Compiled nagios 1.0 and
plugins (latest beta) from source.  Using the default redhat apache install,
etc.  Nothing special on the server.

.dn

--
Donavan Nelson
4wx Networks
www.4wx.net <http://www.4wx.net> 

---------- Original Message -----------
From: Chris Losch  <mailto:Chris.Losch at newham.gov.uk>
<Chris.Losch at newham.gov.uk>
To: "'nagios-users at lists.sourceforge.net'"
<mailto:'nagios-users at lists.sourceforge.net'>
<mailto:nagios-users at lists.sourceforge.net>
<nagios-users at lists.sourceforge.net>
Sent: Thu, 2 Jan 2003 16:55:59 -0000
Subject: RE: [Nagios-users] Problems with Nagios 1.0 on Red Hat 8.0

> Just for Your Information, 
> There are several reported problems with Nagios1.0 on Redhat 8.0... 
> well at least 1 unresolved(?) problem.
> 
> I haven't looked at the below issue specifically, however I have had 
> my own problems - see previous discussions entitiled "[Nagios-users] 
> Permissions Error (Could not stat() command file )"
> 
> I would suggest that you read these threads, and determine if you REALLY
> want to proceed with RH8 knowing that you may encounter these, so far
> unresolved, issues that lie ahead for you.
> 
> Unresolved, that is, unless someone knows better. (Crosses fingers)
> Chris
> 
> -----Original Message-----
> From: Freddy Frouin [  <mailto:freddy.frouin at fluxus.net>
mailto:freddy.frouin at fluxus.net ]
> Sent: 02 January 2003 15:12
> To: Kaplan, Andrew H.
> Cc: nagios-users at lists.sourceforge.net
<mailto:nagios-users at lists.sourceforge.net> 
> Subject: Re: [Nagios-users] Problems with Nagios 1.0 on Red Hat 8.0
> 
> just put the Alias rules before the ScriptAlias one...
> it should work, does'nt it ?
> 
> On Thu, 2 Jan 2003 09:57:24 -0500
> "Kaplan, Andrew H."  <mailto:AHKAPLAN at PARTNERS.ORG>
<AHKAPLAN at PARTNERS.ORG> wrote:
> 
> > I'm having a problem accessing the monitoring pages. The main page can
be
> seen
> > without a problem.
> > However, any one of the monitoring screens comes back with the following
> error
> > message:
> > 
> > NOT FOUND: The requested URL /nagios/cgi-bin/name.cgi was not found on
> this
> > server.
> > 
> > As far as I can tell, I have the appropriate settings configured in the
> > httpd.conf and cgi.cfg files. They
> > are included in this e-mail. What am I missing or did not configure
> correctly?
> > Thanks.
> > 
> >  <<cgi.cfg.txt>>  <<httpd.conf.txt>> 
> > 
> > 
> 
> -- 
> Freddy Frouin
> Responsable Supervision
> British Telecom / Fluxus
> 30, rue du Château des Rentiers
> 75013 Paris
> 
> Tél: +33 (0)1 44 97 70 00
> Fax: +33 (0)1 44 97 70 07
> 
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf <http://thinkgeek.com/sf>  
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
<mailto:Nagios-users at lists.sourceforge.net> 
> https://lists.sourceforge.net/lists/listinfo/nagios-users
<https://lists.sourceforge.net/lists/listinfo/nagios-users>  
> 
> **********************************************************************
Important: This e-mail is intended for the above named person only and
should
be treated as confidential. If this has come to you in error you should take
no action based on it, nor should you copy or show it to anyone; please
telephone us immediately.
**********************************************************************
------- End of Original Message -------


-- 

Russell Scibetti

Quadrix Solutions, Inc.

http://www.quadrix.com <http://www.quadrix.com> 

(732) 235-2335, ext. 7038


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.monitoring-lists.org/archive/users/attachments/20030107/bb64073a/attachment.html>