Does the Availability report have a bug in it? Why is everything undetermined?

[Burnson, Richard]

I have a test system which has been running for only 1 day, and I have no
"undetermined" time listed when I run a 24 hour report.  How often are your
logs archived?

Richard 
 
    

-----Original Message-----
From: Nagios [mailto:nagios at atlantic-isp.co.uk] 
Sent: Thursday, January 16, 2003 4:52 PM
To: 'Burnson, Richard'; nagios-users at lists.sourceforge.net
Subject: RE: [Nagios-users] Does the Availability report have a bug in it?
Why is everything undetermined?

I should have said that this also occurs with service availability
reports where they all only show 62% up and none of the services have
failed over the last 3 days.
Yes I know you can select Host Up or Service Ok from the first assumed
drop down box but in mind you shouldn't have to since I have
log_initial_states set to 1, and you don't seem to have to do this on
the demo site at nagios.org.

> -----Original Message-----
> From: Burnson, Richard [mailto:rburnson at cps.k12.il.us]
> Sent: 16 January 2003 22:35
> To: Nagios; nagios-users at lists.sourceforge.net
> Subject: RE: [Nagios-users] Does the Availability report have a bug in
it? Why is
> everything undetermined?
> 
> Make sure you have this set in Nagios.cfg:
> 
> log_initial_states=1
> 
> What is you log rotation method?  It could simply be that you have not
set
> it for enough "backtracked archives" in the report viewer.
> 
> Richard
> 
> 
> 
> -----Original Message-----
> From: Nagios [mailto:nagios at atlantic-isp.co.uk]
> Sent: Thursday, January 16, 2003 4:28 PM
> To: 'Burnson, Richard'; nagios-users at lists.sourceforge.net
> Subject: RE: [Nagios-users] Does the Availability report have a bug in
it?
> Why is everything undetermined?
> 
> If I specify the last 24 hours I get the same result even though the
> checks have been running non-stop for 3 days.
> 
> 
> > -----Original Message-----
> > From: Burnson, Richard [mailto:rburnson at cps.k12.il.us]
> > Sent: 16 January 2003 22:22
> > To: Nagios; nagios-users at lists.sourceforge.net
> > Subject: RE: [Nagios-users] Does the Availability report have a bug
in
> it? Why is
> > everything undetermined?
> >
> > What is the time frame you have being reported on below?  If nagios
> does not
> > have the log files to go that far in the past, it will only be able
to
> > report on the status in the logs and leave the rest as undetermined.
> >
> > Richard
> >
> >
> > -----Original Message-----
> > From: Nagios [mailto:nagios at atlantic-isp.co.uk]
> > Sent: Thursday, January 16, 2003 4:08 PM
> > To: nagios-users at lists.sourceforge.net
> > Subject: [Nagios-users] Does the Availability report have a bug in
it?
> Why
> > is everything undetermined?
> >
> > Is there a bug in the Availability report in Nagios 1.0?
> > It seems that information about hosts/services availability is
> incorrect.
> > Nagios has been checking these following hosts for the past 3 days
and
> none
> > of them have ever been down, however as far as Nagios is concerned
it
> can
> > only determine for 8% of uptime.
> > I have read some postings to the list about this and I know I have
all
> the
> > options in the configuration correct, such as getting Nagios to
> remember the
> > initial state of a host/service the first time it is checked.
> > Host             % Time Up                 % Time Down        % Time
> > Unreachable    % Time Undetermined
> > lon.tc9.rtr1     8.327% (100.000%)    0.000% (0.000%)   0.000%
> > (0.000%)         91.673%
> > lon.tc9.rtr2     8.253% (100.000%)    0.000% (0.000%)   0.000%
> > (0.000%)         91.747%
> > lon.tc9.rtr3     8.382% (100.000%)    0.000% (0.000%)   0.000%
> > (0.000%)         91.618%
> > lon.tc9.sw1    8.327% (100.000%)    0.000% (0.000%)   0.000%
> > (0.000%)         91.673%
> > lon.tc9.sw2    8.289% (100.000%)    0.000% (0.000%)   0.000%
> > (0.000%)         91.711%
> > lon.the.rtr1     8.363% (100.000%)    0.000% (0.000%)   0.000%
> > (0.000%)         91.637%
> > lon.the.sw1    8.327% (100.000%)    0.000% (0.000%)   0.000%
> > (0.000%)         91.673%
> > lon.the.sw2    8.289% (100.000%)    0.000% (0.000%)   0.000%
> > (0.000%)         91.711%
> >
> > Does anyone have any answers?
> > I even looked on the demo site to see if the same thing happened on
> there
> > but it does not even when you leave all the report options to the
> default.
> > Any help would be appreciated.
> > Thanks
> >
> 




-------------------------------------------------------
This SF.NET email is sponsored by: Thawte.com
Understand how to protect your customers personal information by implementing
SSL on your Apache Web Server. Click here to get our FREE Thawte Apache 
Guide: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0029en