Add mib files to /usr/share/snmp/mibs

[Jeyri bautista]

Hi, the problem was solved. I need copy too the others mib files relationed
with this other.

Thanks,

Jeyri Bautista

----- Original Message ----- 
From: "Jeyri bautista" <jbautista at intercable.net.ve>
To: "Subhendu Ghosh" <sghosh at sghosh.org>
Cc: <nagios-users at lists.sourceforge.net>
Sent: Thursday, March 11, 2004 5:10 PM
Subject: Re: [Nagios-users] Add mib files to /usr/share/snmp/mibs


> Thanks, I solved the problem, but now I have other problem.
>
> My nagios receive the traps from my routers cisco, and is running the
> snmptrapd daemon to receive this traps.
>
> I create a snmptrapd.cong file that compare the traps received with the
mibs
> files, it is working very well with the mib files that was installed with
> the net-snmp package, but when I add a mib file to /usr/share/snmp/mibs
and
> restart the snmptrapd appear the following error:
>
> /etc/snmp/snmptrapd.conf: line 27: Error: Bad trap OID in traphandle
> directive: CISCO-ACCESS-ENVMON-MIB::caemTemperatureNotification
>
> and when I execute:
> >> snmptranslate -Ib -On caemSupplyStatusTable -m
> /usr/share/snmp/mibs/CISCO-ACCESS-ENVMON-MIB.txt
>
> appear the following error:
>
> Unlinked OID in CISCO-ACCESS-ENVMON-MIB: ciscoAccessEnvMonMIB ::= {
> ciscoMgmt 61 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: caemSupplyStatusTable ::= {
> caemObjects 1 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: caemSupplyFailedComponent ::=
> { caemSupplyStatusEntry 1 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: caemGroups ::= {
> caemConformance 2 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: caemCompliances ::= {
> caemConformance 1 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: caemCompliance ::= {
> caemCompliances 1 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: caemGroup ::= { caemGroups
1 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: ciscoAccessEnvMonMIB ::= {
> ciscoMgmt 61 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: caemVoltageNotification ::= {
> caemMIBNotifications 2 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: caemTemperatureNotification
::=
> { caemMIBNotifications 1 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: caemConformance ::= {
> ciscoAccessEnvMonMIB 3 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: caemMIBNotificationPrefix ::=
> { ciscoAccessEnvMonMIB 2 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: caemObjects ::= {
> ciscoAccessEnvMonMIB 1 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: caemMIBNotifications ::= {
> caemMIBNotificationPrefix 0 }
> Cannot adopt OID in CISCO-ACCESS-ENVMON-MIB: caemSupplyStatusEntry ::= {
> caemSupplyStatusTable 1 }
> Unable to find a matching object identifier for "caemSupplyStatusTable"
>
> How can I do to solve that?
>
> Thanks,
>
> Jeyri Bautista
>
> ----- Original Message ----- 
> From: "Subhendu Ghosh" <sghosh at sghosh.org>
> To: "Jeyri bautista" <jbautista at intercable.net.ve>
> Cc: <nagios-users at lists.sourceforge.net>
> Sent: Thursday, March 11, 2004 3:05 PM
> Subject: Re: [Nagios-users] Add mib files to /usr/share/snmp/mibs
>
>
> On Thu, 11 Mar 2004, Jeyri bautista wrote:
>
> > Hi,
> >
> > I´m receiving snmp traps with my nagios, but I need add other mib files
> > to can receive other traps types, but when I copy the new mib file to
> > the path /usr/share/snmp/mibs all my check_snmp goes to warning state.
> >
> > I read the faq, but I don´t understood how to solve that.
> >
> > I don´t know if I have to do other thing that copy the mib in the path.
> >
> > Anybody can help me,
> >
> > Thanks,
> >
> > Jeyri
>
> It means that the mibs files you added do not have the corrent syntax.
> The net-snmp package is relatively strict about syntax.
>
> If you don't feel comfortable correcting the syntax, then change the
> invocation of check_snmp
>
>
> Normally check_snmp will accept either numeric OIDs (e.g. 1.3.6.1.2.1.1.0)
> or textual (e.g. system.0).  When getting textual OIDs, it needs to
> convert them to numeric OIDS.  This is where the mib files come into the
> picture.  Bad syntax generates output on stderr and causes a warning.
>
> To bypass this, make sure you are passing only numeric OIDs to check_snmp
> and also add the "-m :" option to check_snmp.
>
> The -m option specifies the mib modules to load.  Just providing a : makes
> it an empty list and none of the mibs are loaded.
>
> This also make the check_snmp plugin run faster.
>
> To convert you textual oids to numeric, try:
>
> snmptranslate -Ib -On textual oid
>
> -- 
>
> -sg
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=ick
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> ::: Please include Nagios version, plugin version (-v) and OS when
reporting
> any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> ::: Please include Nagios version, plugin version (-v) and OS when
reporting any issue.
> ::: Messages without supporting info will risk being sent to /dev/null



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null