SMS notifications

[Onsite DeTeWe]

Thanks for your reply,

I do have a nokia connected to the serial port, but I am using the phone 
to send the texts.

Regarding the macro, I have also tried just using the mobile number for a 
test.  This still does not work.  Here is a syslog message when a host 
does down.

May 19 11:11:48 SNMPServer nagios: HOST NOTIFICATION: server;fiplog01;UP;
host-notify-by-sms;PING OK - Packet loss = 0%, RTA = 58.53 ms

As you can see the trigger is being used, just nothing more happening.

Jason






Ludo Bosmans <ludo.bosmans at xtenso.be>
19/05/2004 11:06
 
        To:     'Onsite DeTeWe' <Onsite.DeTeWe at firstgroup.com>, 
nagios-users at lists.sourceforge.net
        cc: 
        Subject:        RE: [Nagios-users] SMS notifications



Hi  Jason,
 
I use  also gnokii to send sms's.  I don't know your set-up, do you have a 
Nokia  connected to a serial port ?
Imy  configuration i have a modem connected to the serial port and i 
establish a  call to a local provider smc center. So i am able to drop 
more then 1 sms at the  time in one connection. Only the call to the smc 
center is charged. No charge  for the sms's itself.
 
So i  can not really simulate, but it seems for me that the 
$CONTACTPAGERS$ macro is  wrong, it must be $CONTACTPAGER$.
 
kind  regards,
 
ludo
-----Original Message-----
From: Onsite DeTeWe  [mailto:Onsite.DeTeWe at firstgroup.com]
Sent: woensdag 19 mei 2004  11:34
To: nagios-users at lists.sourceforge.net
Subject:  [Nagios-users] SMS notifications



Hi All, 

I have just setup a  mobile gateway on our nagios box (6310i with serial 
lead ;-).  Got all  the SMS stuff working using gnokii which works a 
treat.  Recommend it to  anyone.  However, when I try and get nagios to 
use a new notify routine  it fails to send the text. 

Debug  so far. 

Got gnokii to send SMS  direct. 
Added notify-by-sms to  misccommands.cfg. 
         I know the above works as I then cut the command from the .cfg 
and run  it from the command line direct and it works. 

Could this be a permissions thing associated with the  nagios user??? 

When I force a host  down and look in the syslog the notification does try 
and send via the correct  command, it seems like just the command from 
within nagios is not  working. 

Hope someone can  help. 

Regards 

Jason 



This is the command line. 

/usr/bin/printf "%b" "**Nagios**\nType: $NOTIFICATIONTYPE$\nHost: 
$HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: 
$OUTPUT$\nDate/Time: $DATETIME$\n" | /usr/local/bin/gnokii --sendsms 
$CONTACTPAGERS$

**********************************************************************
This  message is confidential. It may not be disclosed to, or used by, 
anyone  other than the addressee. If you receive this message in 
error, please  advise us immediately.

Internet email is not necessarily secure. First  does not accept
responsibility for changes to any email which occur after  the email
has been sent. Attachments to this email could contain  software
viruses which could damage your system. First have checked  the
attachments for viruses before sending, but you should  virus-check
them before  opening.

http://www.firstgroup.com
**********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.monitoring-lists.org/archive/users/attachments/20040519/320e10d1/attachment.html>