[Nagios-users] Rép. : Re: [Nagios-users] check_snmp hard question

[Jan Scholten]

> Serveur-Faucon Surveillance wrote:
>> Sorry about that, It seems that the spam solution for our offices is
>> not too friendly with sourceforge. So I removed this email from it :)
>>   You wrote <<<<<<<<<<<<<<<<<< After some mails with Ted (thanks):  
>> check_snmp -H XXX -C public -P 1 -o .1.3.6.1.2.1.2.2.1.8.1 -m ALL Does  
>> result in (Nagios Webinterface): SNMP OK - up(1) That was what
>> you were asking for? >>>>>>>>>>>>>>>>>>>>>
>>   Thats funny because I did tried that, in the Nagios Webinterface is
>> still without the "up".

Strange...

It is working for me (and i have SNMP OK - up(1) in the Nagios  
Webinterface).
check_snmp (nagios-plugins 1.4.0alpha1) 1.36
Nagios 1.2
But even with the 1.3 Plugin i have the same output (SNMP OK- up(1))

Maybe you have a bad MIB? I uses
AGENTX-MIB.txt                       IF-MIB.txt                  
RFC1155-SMI.txt             SNMPv2-SMI.txt
BGP4-MIB.txt                         INET-ADDRESS-MIB.txt        
RFC1213-MIB.txt             SNMPv2-TC.txt
BRIDGE-MIB.txt                       IP-FORWARD-MIB.txt          
RFC-1215.txt                SNMPv2-TC-V1SMI.my
CISCO-CONFIG-MAN-MIB.my              IP-MIB.txt                  
RIPv2-MIB.txt               SNMPv2-TM.txt
CISCO-SMI.my                         IPV6-ICMP-MIB.txt           
RMON-MIB.txt                SNMP-VIEW-BASED-ACM-MIB.txt
CISCO-SYSLOG-MIB-V1SMI.my            IPV6-MIB.txt                
SMUX-MIB.txt                SOURCE-ROUTING-MIB.txt
DISMAN-SCHEDULE-MIB.txt              IPV6-TCP-MIB.txt            
SNMP-COMMUNITY-MIB.txt      TCP-MIB.txt
DISMAN-SCRIPT-MIB.txt                IPV6-TC.txt                 
snmp.conf                   TEST_TRAP.txt
EtherLike-MIB.txt                    IPV6-UDP-MIB.txt            
SNMP-FRAMEWORK-MIB.txt      UCD-DEMO-MIB.txt
GNOME-SMI.txt                        LM-SENSORS-MIB.txt          
SNMP-MPD-MIB.txt            UCD-DISKIO-MIB.txt
HCNUM-TC.txt                         NET-SNMP-AGENT-MIB.txt      
SNMP-NOTIFICATION-MIB.txt   UCD-DLMOD-MIB.txt
HOST-RESOURCES-MIB.txt               NET-SNMP-EXAMPLES-MIB.txt   
SNMP-PROXY-MIB.txt          UCD-IPFWACC-MIB.txt
HOST-RESOURCES-TYPES.txt             NET-SNMP-MIB.txt            
SNMP-TARGET-MIB.txt         UCD-SNMP-MIB.txt
IANA-ADDRESS-FAMILY-NUMBERS-MIB.txt  NET-SNMP-TC.txt             
SNMP-USER-BASED-SM-MIB.txt  UDP-MIB.txt
IANAifType-MIB.txt                   NOTIFICATION-LOG-MIB.txt    
SNMP-USM-AES-MIB.txt
IANA-LANGUAGE-MIB.txt                OSPF-MIB.txt                
SNMPv2-CONF.txt
IF-INVERTED-STACK-MIB.txt            OSPF-TRAP-MIB.txt           
SNMPv2-MIB.txt

( net-snmp Mibs = some Cisco Mibs.)

Can't see why it's not working.. does fine for me..

>>
>
> That's because the status message will only be updated after the check  
> has failed and then turned back to OK again.

I don't understand that :-) everytime see state get's checked it says
SNMP OK - up(1)

>> What version of plugins are you using? Witch version of Nagios?
>>  I have Nagios 1.2 and ... check_snmp (nagios-plugins 1.3.99) 1.35
See above.. working with 1.40a and 1.31



-- 
Jan Scholten
Research and Development Intern
Iconz.co.nz


-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null