Not able ot view hosts/services in the Trends.cgi link

Marc Powell marc at ena.com
Tue Apr 11 16:41:04 CEST 2006 

Please post an 'ls -al' of the following directories --

/usr/local/nagios
/usr/local/nagios/etc
/usr/local/nagios/var

Also post your apache config parts related to nagios.

Thanks,

marc

> -----Original Message-----
> From: satish kumar [mailto:satish_lsurf at yahoo.com]
> Sent: Monday, April 10, 2006 10:59 PM
> To: satish kumar; Marc Powell; nagios-users at lists.sourceforge.net
> Subject: RE: [Nagios-users] Not able ot view hosts/services in the
> Trends.cgi link
> 
> Hi All,
> 
> I am still finding the problem and is it related to any rpms missing (gd,
> libpng,libjpeg etc......).Please help me in this issue.
> 
> Thanks, Satish
> 
> satish kumar <satish_lsurf at yahoo.com> wrote:
> 
> 	Hi,
> 
> 	I have enabled the notification & Service checks and the nagios has
> sent a lot of notifications for various services.And the permission wise
> others has rx permissions where apache belongs to.I am pasting the output
> of the command below.
> 	=====================
> 	[root at exlinux3 bin]# ./nagios -v ../etc/nagios.cfg
> 
> 	Nagios 2.1
> 	Copyright (c) 1999-2006 Ethan Galstad (http://www.nagios.org)
> 	Last Modified: 03-27-2006
> 	License: GPL
> 
> 	Reading configuration data...
> 
> 	Running pre-flight check on configuration data...
> 
> 	Checking services...
> 	        Checked 222 services.
> 	Checking hosts...
> 	        Checked 67 hosts.
> 	Checking host groups...
> 	        Checked 19 host groups.
> 	Checking service groups...
> 	        Checked 0 service groups.
> 	Checking contacts...
> 	        Checked 8 contacts.
> 	Checking contact groups...
> 	        Checked 5 contact groups.
> 	Checking service escalations...
> 	        Checked 0 service escalations.
> 	Checking service dependencies...
> 	        Checked 0 service dependencies.
> 	Checking host escalations...
> 	        Checked 0 host escalations.
> 	Checking host dependencies...
> 	        Checked 0 host dependencies.
> 	Checking commands...
> 	        Checked 105 commands.
> 	Checking time periods...
> 	        Checked 3 time periods.
> 	Checking extended host info definitions...
> 	        Checked 0 extended host info definitions.
> 	Checking extended service info definitions...
> 	        Checked 0 extended service info definitions.
> 	Checking for circular paths between hosts...
> 	Checking for circular host and service dependencies...
> 	Checking global event handlers...
> 	Checking obsessive compulsive processor commands...
> 	Checking misc settings...
> 
> 	Total Warnings: 0
> 	Total Errors:   0
> 
> 	Things look okay - No serious problems were detected during the pre-
> flight check
> 	======================
> 
> 	Thanks, Satish
> 
> 	Marc Powell <marc at ena.com> wrote:
> 
> 		According to your own screenshots Notifications are disabled
> and Service
> 		checks are disabled. While I haven't personally experienced
> the symptoms
> 		you're seeing, the three screenshots seem to imply a problem
> reading the
> 		config files. Does your web server have permission to read the
> .cfg
> 		files? Can you use the View Config link to see your
> configuration?
> 
> 		Also, from the command line as the nagios user run
> 		'/path/to/nagios/bin/nagios -v /path/to/nagios/etc/nagios.cfg'
> and post
> 		it's output. Perhaps if you posted the screenshots where other
> can see
> 		them someone else who has seen the problem before can help
> you.
> 
> 		--
> 		Marc
> 
> 		> -----Original Message-----
> 		> From: satish kumar [mailto:satish_lsurf at yahoo.com]
> 		> Sent: Friday, April 07, 2006 1:25 PM
> 		> To: Marc Powell
> 		> Subject: RE: [Nagios-users] Not able ot view hosts/services
> in the
> 		> Trends.cgi link
> 		>
> 		> I am forwarding the screenshots, Please let me know for
> further
> 		> troubleshooting.
> 		> I am running nagios 2.0, with notification & services
> enabled.There
> 		are no
> 		> errors found in the apache logs.Regarding Auth problem, i
> have enabled
> 		all
> 		> the parameters with the user nagios as owner.
> 		>
> 		> Thanks, satish
> 		>
> 		> Marc Powell wrote:
> 		>
> 		>
> 		>
> 		> > -----Original Message-----
> 		> > From: nagios-users-admin at lists.sourceforge.net
> [mailto:nagios-
> 		> users-
> 		> > admin at lists.sourceforge.net] On Behalf Of Hugo van der
> Kooij
> 		> > Sent: Thursday, April 06, 2006 12:31 AM
> 		> > To: nagios
> 		> > Subject: Re: [Nagios-users] Not able ot view
> hosts/services in
> 		the
> 		> > Trends.cgi link
> 		> >
> 		> > On Wed, 5 Apr 2006, satish kumar wrote:
> 		> >
> 		> > > I am not able to see the hosts/services when we click
> the
> 		links
> 		> on
> 		> > trends.cgi, statusmap.cgi & alert histogram.cgi.I get the
> 		common
> 		> message
> 		> > on the lefthand side of the webpage as
> 		> > >
> 		> > > Host and Service State Trends
> 		> > > Last Updated: Thu Apr 6 01:13:00 WET 2006
> 		> > > Nagios(r) - www.nagios.org
> 		> > > Logged in as nagios
> 		> > >
> 		> > > - Notifications are disabled
> 		> > > - Service checks are disabled
> 		> >
> 		> > If you read this message you should pay attention to it
> and
> 		enable
> 		> > notifications anc service checks as suggested.
> 		>
> 		> And it would do nothing to resolve his problem. Those are
> just
> 		> informational messages about the overall nagios
> configuration
> 		and
> 		> have
> 		> nothing to do with the functionality of the cgi's in
> question.
> 		>
> 		> To the OP: You have not provided enough information to
> determine
> 		> what
> 		> might be going on. What nagios version are you running? Is
> there
> 		any
> 		> other information in the right frame when you click on those
> 		links?
> 		> Can
> 		> you post a screenshot somewhere (don't send it to the list)?
> Do
> 		you
> 		> see
> 		> any errors in your web server logs? There are a number of
> FAQ's
> 		> related
> 		> to these CGIs, please review them to make sure you've
> covered
> 		those
> 		> problems.
> 		>
> 
> 
> 		-------------------------------------------------------
> 		This SF.Net email is sponsored by xPML, a groundbreaking
> scripting language
> 		that extends applications into web and mobile media. Attend
> the live webcast
> 		and join the prime developer group breaking into this new
> coding territory!
> 		http://sel.as-
> us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642
> 		_______________________________________________
> 		Nagios-users mailing list
> 		Nagios-users at lists.sourceforge.net
> 		https://lists.sourceforge.net/lists/listinfo/nagios-users
> 		::: Please include Nagios version, plugin version (-v) and OS
> when reporting any issue.
> 		::: Messages without supporting info will risk being sent to
> /dev/null
> 
> 
> 
> ________________________________
> 
> 	Love cheap thrills? Enjoy PC-to-Phone calls to 30+ countries
> <http://us.rd.yahoo.com/mail_us/taglines/postman9/*http://us.rd.yahoo.com/
> evt=39666/*http://beta.messenger.yahoo.com/>  for just 2�/min with
> Yahoo! Messenger with Voice.
> 
> 
> ________________________________
> 
> Blab-away for as little as 1¢/min. Make PC-to-Phone Calls
> <http://us.rd.yahoo.com/mail_us/taglines/postman2/*http://us.rd.yahoo.com/
> evt=39663/*http://voice.yahoo.com>  using Yahoo! Messenger with Voice.


-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null

More information about the Users mailing list