R: I: NSClient++ configuration problems

[Dany Allard]

Marco

Your syntax looks correct, here are a couple examples from my system..
./check_nrpe -H hostName -c check_load
NOW: Mean:0.437500% Variance: 0.114844% CUMULATIVE: Mean:0.437500% Variance: 0.114844%
./check_nt -H hostName -p 1248 -v UPTIME
System Uptime - 14 day(s) 19 hour(s) 55 minute(s)

Hope that helps

 Dany Allard

-----Original Message-----
From: Marco Borsani [mailto:m.borsani at it.net] 
Sent: Wednesday, February 22, 2006 1:50 AM
To: Dany Allard; 'NAGIOS'
Subject: R: R: [Nagios-users] I: NSClient++ configuration problems

Hi

May someone give me any examples of commands to use to communicate with
NSClient++?

I tried:
./check_nt -H 151.x.x.x -v USEDDISKSPACE -l check_disk_c
Where "check_disk_c" is a line uncommented in the nsc.ini file
The answer is: "wrong -l argument"
Or
./check_nrpe -H 151.x.x.x -c check_users
Where "check_users" is a line uncommented in the nsc.ini file
The answer is: "CHECK_NRPE: Error receiving data from host"

May I use same "check_nrpe" that I am using for Unix systems?
And same "check_nt" that I am using with old NSClient agent?

Regards
Marco

-}-----Messaggio originale-----
-}Da: nagios-users-admin at lists.sourceforge.net 
-}[mailto:nagios-users-admin at lists.sourceforge.net] Per conto 
-}di Dany Allard
-}Inviato: venerdì 17 febbraio 2006 19.20
-}A: NAGIOS
-}Oggetto: RE: R: [Nagios-users] I: NSClient++ configuration problems
-}
-}Marco
-}
-} A quick test to make sure that the port is open is to telnet to it.
-}> telnet YourHostname 1248
-}
-}If you don't get a connection failed message the port should be open.
-}If it fails with "..Could not open connection to the host..." 
-}then the port is being blocked somewhere.
-}
-} Dany Allard
-}
-}-----Original Message-----
-}From: nagios-users-admin at lists.sourceforge.net
-}[mailto:nagios-users-admin at lists.sourceforge.net] On Behalf 
-}Of Marco Borsani
-}Sent: Thursday, February 16, 2006 3:11 AM
-}To: 'Michael Medin'
-}Cc: 'NAGIOS'
-}Subject: R: R: [Nagios-users] I: NSClient++ configuration problems
-}
-}I set 1248 (NSClient) and 5666 (NRPE) ports on NCS.INI file.
-}I see both ports open (but associated to local IP 0.0.0.0), 
-}NSClient++ is running, but neither a check_nt, a check_nrpe 
-}or a check_tcp run correctly.
-}
-}Marco
-}<snip>
-}This message is intended only for the addressee and may 
-}contain personal, privileged or confidential information. 
-}If you have received this message in error, please notify the 
-}sender immediately and delete or destroy this message without 
-}making copies or opening any attachments. Any further 
-}distribution, duplication or disclosure is prohibited.
-}
-}
-}-------------------------------------------------------
-}This SF.net email is sponsored by: Splunk Inc. Do you grep 
-}through log files for problems?  Stop!  Download the new AJAX 
-}search engine that makes searching your log files as easy as 
-}surfing the  web.  DOWNLOAD SPLUNK!
-}http://sel.as-us.falkag.net/sel?cmd=k&kid3432&bid#0486&dat1642
-}_______________________________________________
-}Nagios-users mailing list
-}Nagios-users at lists.sourceforge.net
-}https://lists.sourceforge.net/lists/listinfo/nagios-users
-}::: Please include Nagios version, plugin version (-v) and OS 
-}when reporting any issue. 
-}::: Messages without supporting info will risk being sent to /dev/null
-}



-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid3432&bid#0486&dat1642
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null