interval setup wont work

[Arno Lehmann]

Hi,

On 1/16/2007 12:09 PM, Daniel wrote:
> Hi there,
> 
> i setup a host to check every 30secs btw every 60secs.
> 
> The last check  command was sheduled:
> 
> Last Check Time:   01-16-2007 11:54:11
> 
> Now 10 minutes are over and nothink happends:
> 
> Here my config for this host:

Your config shows an interval of 60.
The normal interval length is 1 minute.

You'll have to change your configuration accordingly.

This is all in the Manual, by the way.

Arno

> define host{
>         name                            ipv6    ; The name of this host template - referenced in other host definitions, used for template recurs$
>         notifications_enabled           1       ; Host notifications are enabled
>         event_handler_enabled           1       ; Host event handler is enabled
>         flap_detection_enabled          0       ; Flap detection is enabled
>         process_perf_data               1       ; Process performance data
>         retain_status_information       1       ; Retain status information across program restarts
>         retain_nonstatus_information    1       ; Retain non-status information across program restarts
>         parents                         ipv6
>         register                        0       ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
>         }
> 
> define service{
>         ; The 'name' of this service template, referenced in other service definitions
>         name                            ipv6
>         active_checks_enabled           1       ; Active service checks are enabled
>         passive_checks_enabled          0       ; Passive service checks are enabled/disabled
>         parallelize_check               1       ; Active service checks should be parallelized
>                                                 ; (disabling this can lead to major performance problems)
>         obsess_over_service             1       ; We should obsess over this service (if necessary)
>         check_freshness                 0       ; Default is to NOT check service 'freshness'
>         notifications_enabled           1       ; Service notifications are disabled
>         event_handler_enabled           1       ; Service event handler is disabled
>         flap_detection_enabled          0       ; Flap detection is disabled
>         process_perf_data               1       ; Process performance data
>         retain_status_information       1       ; Retain status information across program restarts
>         retain_nonstatus_information    1       ; Retain non-status information across program restarts
> 
>         register                        0       ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
>         normal_check_interval           30
>         retry_check_interval            30
> 
>    }
> 
> 
> 
> define host{
>         use                             ipv6
>         host_name                       vs-uptime
>         alias                           vs-uptime
>         address                         89.106.71.100
>         check_command                   check-host-alive
>         max_check_attempts              5
>         process_perf_data               0
>         retain_nonstatus_information    0
>         contact_groups                  IPv6
>         notification_interval           10
>         notification_period             24x7
>         notification_options            d,u,r
>         }
> 
> define service{
>         use                             ipv6
>         host_name                       vs-uptime
>         service_description             PING
>         is_volatile                     0
>         check_period                    24x7
>         max_check_attempts              1
>         normal_check_interval           1
>         retry_check_interval            1
>         contact_groups                  IPv6
>         notification_options            w,u,c,r
>         notification_interval           10
>         notification_period             24x7
>         check_command                   check_ping!100.0,40%!500.0,60%
>         }
> 
> 
> In the nagios.cfg the normal check interval is set to 60secs.
> 
> Nothink seems to be work... :(
> 
> 

-- 
IT-Service Lehmann                    al at its-lehmann.de
Arno Lehmann                  http://www.its-lehmann.de

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null