Disks not reporting correctly

[cjackson]

Justin Maloney wrote:
> So I see the df there, what does the output from nrpe show you?  And
> what's the out put of "df -k"? Could be the df you use is defaulting to
> 512-byte blocks or the check_disk command might.  Just a thought.
> 
> Thank you,
> 
> Justin Maloney
> 
> Systems Administrator
> 
> Honeycomb Internet Services
> 
> 612.617.0007

Justin,

The output of df -k is

Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sda1             28834716   1238228  26131764   5% /
varrun                 5114228       224   5114004   1% /var/run
varlock                5114228         0   5114228   0% /var/lock
procbususb             5114228        72   5114156   1% /proc/bus/usb
udev                   5114228        72   5114156   1% /dev
devshm                 5114228         0   5114228   0% /dev/shm
lrm                    5114228     38972   5075256   1% 
/lib/modules/2.6.20-15-generic/volatile
/dev/sdb1            480719056 138018784 318281072  31% 
/var/spool/exim/vmail
/dev/sdc1            480719056 137322512 318977344  31% /mnt/mailBAC


How do I see the output of the Nrpe command?

Thanks.
Craig

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null