snmp v3 on 3600

[Larry Low]

Does the Nagios server have 161 into the firewall allowed?

----
Larry Low
4150 N Drinkwater Blvd., 5th Floor
Scottsdale, AZ  85251
Office: 480.385.7045
E-mail: llow at telesphere.com'

Telesphere Networks, Inc


> -----Original Message-----
> From: Brian Loe [mailto:knobdy at gmail.com]
> Sent: Thursday, February 14, 2008 1:30 PM
> To: Larry Low
> Cc: Nagios Users Mailinglist
> Subject: Re: [Nagios-users] snmp v3 on 3600
> 
> On Thu, Feb 14, 2008 at 10:09 AM, Larry Low <llow at telesphere.com>
> wrote:
> > Here is a simple authNoPriv setup.  The snmp-server user will not
> show up on
> >  the config but is stored in a private config in flash.  'show snmp
> user' can
> >  be used to get info.
> >
> >  snmp-server group <group name> v3 auth access <acl list>
> >  snmp-server user <user> <group> v3 auth md5 <password>
> >
> >  You will probably want to do more to lock down access as RW is
> available
> >  with those commands.
> 
> I've done this with no luck... chasing a firewall issue as I'm only
> getting timeouts.
> 
> Anything not obvious about how the firewall should be configured (out
> of my control in this environment)? This is an ISP router  and the
> firewall has UDP 161 opened up going out from Nagios server to the
> router only.


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null