check_http issues...

[Victor Lanza]

I'm using Nagios 3.0.1 with Plugins 1.4.11

Ahhhhh..

Well on another note if I were to use this password, where would I need to
put the escape character?

The password is: 123$45!

I'll try that if not, I'll try to create a separate non admin user with
enough rights to log in

-----Original Message-----
From: nagios-users-bounces at lists.sourceforge.net
[mailto:nagios-users-bounces at lists.sourceforge.net] On Behalf Of Marc Powell
Sent: Thursday, June 05, 2008 3:39 PM
To: nagios Mailinglist
Subject: Re: [Nagios-users] check_http issues...


On Jun 5, 2008, at 2:08 PM, Victor Lanza wrote:

> The password is: 123$45!
>
> The reason why I was passing it in single quotes was because the  
> check_http
> plugin seemed to be able to pass it on to the site to authenticate  
> with it
> just fine. If I removed the quotes, I got an access denied message.  
> However
> this only works via the command line.
>
> Here is what I got in the logfiles:
>
> 2008-5-5 14:56:58 ------ debugging
> cmd=[/usr/local/nagios/libexec/check_http '-H' '10.10.4.10' '-a'
> 'admin:123$45!$']
> output=[HTTP WARNING: HTTP/1.1 401 Unauthorized
> ]
> retcode=1
> -------
> 2008-5-5 14:58:13 ------ debugging
> cmd=[/usr/local/nagios/libexec/check_http '-H' '10.10.4.10' '-a'
> 'admin:1235!$']
> output=[HTTP WARNING: HTTP/1.1 401 Unauthorized
> ]
> retcode=1
> -------
>
> Notice how on the first error it has the $ misplaced at the end as  
> well as
> after the 3. In the 2nd one it doesn't have $ after 3, it has it at  
> the end
> instead. The password is this way due to strict password rules here  
> and I
> don't think I could use a simpler one. However, if it works via the  
> command
> line I don't see why it shouldn't work through the nagios  
> interface. :(

I don't know what version of nagios you are using but this appears  
relevant and was submitted to nagios-devel late last week --

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=480001

Note also that '!' has special meaning to nagios in service{} and  
host{} command_lines regardless of whether it's enclosed in quotes or  
not. Nagios-3 addresses that --

http://nagios.sourceforge.net/docs/3_0/whatsnew.html

"Escaped command arguments - You can now pass bang (!) characters in  
your command arguments by escaping them with a backslash (\). If you  
need to include backslashes in your command arguments, they should  
also be escaped with a backslash."

--
Marc

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue. 
::: Messages without supporting info will risk being sent to /dev/null


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null