strange nrpe behaviour
Federico Donati
federico.donati at hermess.it
Wed Mar 12 15:49:06 CET 2008
Hi all,
i have a Dell PowerEdge 1950 server with a PERC Raid Controller. It runs
Debian Etch, updated.
I've installed nrpe on the machine and all works fine, except for the
raid check.
I use the check_dell_omreport, that i found here:
http://www.nagiosexchange.org/DELL_Server.61.0.html?&tx_netnagext_pi1[p_view]=433
So, if i run the command on the server (by hand), the output is correct:
# /usr/lib/nagios/plugins/check_dell_omreport.pl
OK: Controller0=Ok/Ready [ Battery0=Ok/Ready Vdisk0=Ok/Ready [
0:0:0=Ok/Online 0:0:1=Ok/Online ] ]
But when i run it from the Nagios server machine, it won't works :(
morfeorz:~# /usr/lib/nagios/plugins/check_nrpe -H 192.168.2.3 -c check_raid
STORAGE: UNKNOWN
check_raid is defined as:
"command[check_raid]=/usr/lib/nagios/plugins/check_dell_omreport.pl"
I've alredy tried to restart the nrpe-server, but without success.
Any suggestion about this quirk behaviour? I have the same configuration
for other machine, that work perfectly.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null
More information about the Users
mailing list