HP Network Printer

[Martyn]

James thanks for the reply, looks like there are many users with the same
issue as me,
http://osdir.com/ml/network.nagios.plugins/2006-11/msg00062.html
 
The reason I want to use check_hpjd is because it reports back the toner
levels too.
 
I have spent the last 5 hours on Google and can not find any fix, does this
group know of a fix at all or do you think its a bug?
 
Thanks

  _____  

From: James Pratt [mailto:jpratt at norwich.edu] 
Sent: 02 February 2009 20:19
To: nagios-users at lists.sourceforge.net; martyn at chetnet.co.uk
Subject: RE: [Nagios-users] HP Network Printer



Sorry Palle, I meant to reply to the list!.. my bad. :-(

 

From: James Pratt 
Sent: Monday, February 02, 2009 3:16 PM
To: 'Palle L Jensen'
Subject: RE: [Nagios-users] HP Network Printer

 

Hi, I found this on a quick google - I use snmp extensively. (Check_snmp is
fairly worthless - I use the ones at http://nagios.manubulon.com instead.

 

 

http://osdir.com/ml/network.nagios.user/2003-01/msg00028.html

 

HTH

 

Regards,

jamie

 

From: Palle L Jensen [mailto:palleje at gmail.com] 
Sent: Monday, February 02, 2009 3:00 PM
To: 'Martyn'; nagios-users at lists.sourceforge.net
Subject: Re: [Nagios-users] HP Network Printer

 

Martyn,

 

I have noticed people monitoring other stuff on printers using the SNMP
protocoll. However, since we have that protocol disabled I have no
experience in that. If you just want to make sure it is up and running you
could use the check_ping. Assuming it's a network printer with enabled NIC.

 

Thanks,

PJ

 

  _____  

From: Martyn [mailto:martyn at chetnet.co.uk] 
Sent: Monday, February 02, 2009 1:13 PM
To: nagios-users at lists.sourceforge.net
Subject: Re: [Nagios-users] HP Network Printer

 

Update, but I'm still getting "Error in packet ( ) " in my printer status 

I can walk the Mibs with snmpwalk -v 1 -c public 192.168.3.252 and see all
the relevant outputs but when I do the following: -

./check_snmp -H 192.168.3.252 -C public 

I get SNMP problem - No Data received from host 
CMD /usr/bin/snmpget -t 1 -r5 -m ' ' -v 1 [authpriv] 192.168.3.252:161 

Hope you can help 

_____________________________________________ 
From:   Martyn [ <mailto:martyn at chetnet.co.uk> mailto:martyn at chetnet.co.uk] 
Sent:   02 February 2009 17:33 
To:     'nagios-users at lists.sourceforge.net' 
Subject:        HP Network Printer 

Just looking to start and monitor an HP 2600n printer and have come across
the following statement in the quick start guide

The check_hpjd plugin will only get compiled and installed if you have the
net-snmp and net-snmp-utils 
packages installed on your system. Make sure the plugin exists in
/usr/local/nagios/libexec before you 
continue. If it doesn't, install net-snmp and net-snmp-utils and
recompile/reinstall the Nagios plugins. 

OK do these get installed when you download and compile
nagios-plugins-1.4.11.tar.gz or do I have to grab then separately, I have
looked through my nagios/libexec directory and noticed that check_snmp is in
there but not the above two.

Where would I get hold of the two files as described 

Thanks for your continued support 

Martyn 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.monitoring-lists.org/archive/users/attachments/20090202/3c902eae/attachment.html>
-------------- next part --------------
------------------------------------------------------------------------------
Create and Deploy Rich Internet Apps outside the browser with Adobe(R)AIR(TM)
software. With Adobe AIR, Ajax developers can use existing skills and code to
build responsive, highly engaging applications that combine the power of local
resources and data with the reach of the web. Download the Adobe AIR SDK and
Ajax docs to start building applications today-http://p.sf.net/sfu/adobe-com
-------------- next part --------------
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null