check_hpasm (3.5) problem on RHEL3

[CSingh at lightspeedresearch.com]

I have check_hpasm installed successfully on RHEL3 but I am unable to
get it to work (I have it working correctly for me on RHEL4 and 5). Here
is the problem that I face with RHEL3:

 

[nagios at mysys nagios]$ /usr/local/nagios/libexec/check_nrpe -H localhost
-c check_hpasm

UNKNOWN - insufficient rights to call /usr/sbin/hpacucli

 

[nagios at mysys nagios]$ sudo /usr/local/nagios/libexec/check_hpasm -v

UNKNOWN - insufficient rights to call /usr/sbin/hpacucli

 

My /etc/sudoers has

 

nagios
ALL=NOPASSWD:/sbin/hpasmcli,/usr/sbin/hpacucli,/usr/local/nagios/libexec
/check_hpasm

 

 

Calling /usr/bin/hpacucli works correctly using sudo:

 

[nagios at mysys nagios]$ sudo /usr/sbin/hpacucli

HP Array Configuration Utility CLI 7.40.7.0

Detecting Controllers...Done.

Type "help" for a list of supported commands.

Type "exit" to close the console.

 

=>

 

[nagios at mysys nagios]$ sudo /usr/sbin/hpacucli -s help

 

To enter the ACU CLI console type:

   hpacucli

 

Commands can also be executed from outside the

ACU CLI console using the syntax:

   hpacucli <target> <command> [param[=value]]

 

All targets, commands, parameters, and values must be entered in
lowercase.

The only exceptions to this are user-specified names, such as
chassisname.

 

<target> <command> [param[=value]]

<target> is of format:

  [controller all|slot=#|wwn=#|chassisname="AAA"] [array all|<id>]

  [physicaldrive all|#:#:#|allunassigned] [logicaldrive all|#]

  Note: The first # in physicaldrive is only needed for systems that

        specify port:box:bay. Other physical drive targeting schemes

        are box:bay and port:id.

Example targets:

   controller all

   controller slot=5

   controller chassisname="Lab C"

   controller serialnumber=P21DA2322S

   controller wwn=500308B300701011

   controller slot=1 array all

   controller slot=7 array A

   ctrl slot=1 pd allunassigned

   controller slot=2 logicaldrive all

   controller slot=5 ld 5

   controller slot=5 physicaldrive 1:5

   controller slot=5 physicaldrive 1E:2:3

 

<command> can be "create","delete","modify","show","rescan"

For detailed command information type any of the following:

   help add

   help create

   help delete

   help modify

   help remove

   help shorthand

   help show

   help target

   help rescan

 

 

What else could I try?

 

Thanks!

Charanbeer


This email is intended only for the named person or entity to which it is addressed and contains valuable business information that is proprietary, privileged, confidential and/or otherwise protected from disclosure. Dissemination, distribution or copying of this email or the information herein by anyone other than the intended recipient, or an employee or agent responsible for delivering the message to the intended recipient, is prohibited. If you have received this email by mistake, please delete it from your system immediately and notify the sender. Email transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of email transmission.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.monitoring-lists.org/archive/users/attachments/20090609/0df2f7b9/attachment.html>
-------------- next part --------------
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables unlimited
royalty-free distribution of the report engine for externally facing 
server and web deployment.
http://p.sf.net/sfu/businessobjects
-------------- next part --------------
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null