NDOUtils and Mysql libraries assistance needed
Michael Friedrich
michael.friedrich at univie.ac.at
Mon Jun 29 09:29:36 CEST 2009
Hmmm
stop nagios, stop ndo
start ndo, start nagios
if this doesn't do the trick, please tell again, which nagios version
and which ndo version you are currently using. afaik nagios 2 works with
ndo 1.4b7
Kind regards,
Michael
Natalie Aloi wrote the following on 25.06.2009 23:10:
> I change it but am still getting could not sink data error...
>
> # DATABASE TABLE PREFIX
> # Determines the prefix (if any) that should be prepended to table names.
> #db_prefix=
> db_prefix=ndo_
> then I stopped ndo2db and restarted it, then restarted nagios
> [root at nagios nagios]# ps -ef | grep ndo2db
> root 601 1 0 13:04 ? 00:00:00 ndo2db -c
> /etc/nagios/ndo2db.cfg
> root 11550 12431 0 16:01 pts/1 00:00:00 grep ndo2db
> [root at nagios nagios]# kill 601
> [root at nagios nagios]# ps -ef | grep ndo2db
> root 13403 12431 0 16:07 pts/1 00:00:00 grep ndo2db
> [root at nagios nagios]# cd /usr/sbin
> [root at nagios sbin]# ndo2db -c /etc/nagios/ndo2db.cfg
> [root at nagios sbin]# sudo service nagios restart
> Running configuration check...done
> Stopping nagios: .done.
> Starting nagios: done.
> [root at nagios sbin]# tail /var/log/nagios/nagios.log
> [1245960534] Caught SIGTERM, shutting down...
> [1245960534] Successfully shutdown... (PID=3070)
> [1245960534] ndomod: Shutdown complete.
> [1245960534] Event broker module '/usr/sbin/ndomod.o' deinitialized
> successfully.
> [1245960535] Nagios 2.11 starting... (PID=14253)
> [1245960535] LOG VERSION: 2.0
> [1245960535] ndomod: NDOMOD 1.3.1 Copyright (c) 2005-2006 Ethan
> Galstad (nagios at nagios.org <mailto:nagios at nagios.org>)
> [1245960535] ndomod: Could not open data sink! I'll keep trying, but
> some output may get lost...
> [1245960535] Event broker module '/usr/sbin/ndomod.o' initialized
> successfully.
> [1245960535] Finished daemonizing... (New PID=14254)
>
> -----Original Message-----
> *From:* Michael Friedrich [mailto:michael.friedrich at univie.ac.at]
> *Sent:* Thursday, June 25, 2009 02:18 PM
> *To:* 'Natalie Aloi'
> *Cc:* 'Nagios Users Mail-list'
> *Subject:* Re: [Nagios-users] NDOUtils and Mysql libraries
> assistance needed
>
> Your database table scheme is with prefix "ndo_" so you have to
> set that in your ndo2db.cfg too
>
> and make sure you start ndo2db first and then nagios.
>
>
> Natalie Aloi wrote:
>> woohoo! Thanks Michael!
>> [root at nagios src]# cp ndomod-2x.o /usr/sbin/ndomod.o
>> cp: overwrite `/usr/sbin/ndomod.o'? y
>> [root at nagios src]# cp ndo2db-2x /usr/sbin/ndo2db
>> [root at nagios src]# cd /usr/sbin
>> [root at nagios sbin]# ndo2db -c /etc/nagios/ndo2db.cfg
>> [root at nagios sbin]# ps -ef | grep ndo2db
>> root 601 1 0 13:04 ? 00:00:00 ndo2db -c
>> /etc/nagios/ndo2db.cfg
>> root 617 12431 0 13:04 pts/1 00:00:00 grep ndo2db
>> [root at nagios sbin]#
>>
>> Except!...shoot!...I am getting that dumb error but I have those
>> lines verified - ndo2db.cfg and ndomod.cfg files included
>>
>> [root at nagios nagios]# tail /var/log/nagios/nagios.log
>> [1245950692] Caught SIGTERM, shutting down...
>> [1245950692] Successfully shutdown... (PID=739)
>> [1245950692] ndomod: Shutdown complete.
>> [1245950692] Event broker module '/usr/sbin/ndomod.o'
>> deinitialized successfully.
>> [1245950693] Nagios 2.11 starting... (PID=1813)
>> [1245950693] LOG VERSION: 2.0
>> [1245950693] ndomod: NDOMOD 1.3.1 Copyright (c) 2005-2006 Ethan
>> Galstad (nagios at nagios.org <mailto:nagios at nagios.org>)
>> [1245950693] ndomod: Could not open data sink! I'll keep trying,
>> but some output may get lost...
>> [1245950693] Event broker module '/usr/sbin/ndomod.o' initialized
>> successfully.
>> [1245950693] Finished daemonizing... (New PID=1814)
>>
>> [root at nagios nagios]# more ndomod.cfg
>> #####################################################################
>> # NDOMOD CONFIG FILE
>> #
>> # Last Modified: 01-10-2006
>> #####################################################################
>>
>> # INSTANCE NAME
>> # This option identifies the "name" associated with this particular
>> # instance of Nagios and is used to seperate data coming from
>> multiple
>> # instances. Defaults to 'default' (without quotes).
>> instance_name=default
>>
>> # OUTPUT TYPE
>> # This option determines what type of output sink the NDO NEB module
>> # should use for data output. Valid options include:
>> # file = standard text file
>> # tcpsocket = TCP socket
>> # unixsocket = UNIX domain socket (default)
>> #output_type=file
>> #output_type=tcpsocket
>> output_type=unixsocket
>>
>> # OUTPUT
>> # This option determines the name and path of the file or UNIX domain
>> # socket to which output will be sent if the output type option
>> specified
>> # above is "file" or "unixsocket", respectively. If the output type
>> # option is "tcpsocket", this option is used to specify the IP
>> address
>> # of fully qualified domain name of the host that the module should
>> # connect to for sending output.
>> #output=/usr/local/nagios/var/ndo.dat
>> #output=127.0.0.1
>> output=/var/run/nagios/ndo.sock
>>
>> [root at nagios nagios]# more ndo2db.cfg
>> #####################################################################
>> # NDO2DB DAEMON CONFIG FILE
>> #
>> # Last Modified: 02-12-2006
>> #####################################################################
>>
>> # SOCKET TYPE
>> # This option determines what type of socket the daemon will create
>> # an accept connections from.
>> # Value:
>> # unix = Unix domain socket (default)
>> # tcp = TCP socket
>> socket_type=unix
>> #socket_type=tcp
>>
>> # SOCKET NAME
>> # This option determines the name and path of the UNIX domain
>> # socket that the daemon will create and accept connections from.
>> # This option is only valid if the socket type specified above
>> # is "unix".
>> #socket_name=/usr/local/nagios/var/ndo.sock
>> socket_name=/var/run/nagios/ndo.sock
>>
>> # TCP PORT
>> # This option determines what port the daemon will listen for
>> # connections on. This option is only vlaid if the socket type
>> # specified above is "tcp".
>> tcp_port=5668
>>
>> # DATABASE SERVER TYPE
>> # This option determines what type of DB server the daemon should
>> # connect to.
>> # Values:
>> # mysql = MySQL
>> # pgsql = PostgreSQL
>> db_servertype=mysql
>>
>> # DATABASE HOST
>> # This option specifies what host the DB server is running on.
>> db_host=localhost
>>
>> # DATABASE PORT
>> # This option specifies the port that the DB server is running on.
>> # Values:
>> # 3306 = Default MySQL port
>> # 5432 = Default PostgreSQL port
>> db_port=3306
>>
>> # DATABASE NAME
>> # This option specifies the name of the database that should be used.
>> db_name=nagios
>>
>> # DATABASE TABLE PREFIX
>> # Determines the prefix (if any) that should be prepended to
>> table names.
>> db_prefix=
>> #db_prefix=ndo_
>>
>> # DATABASE USERNAME/PASSWORD
>> # This is the username/password that will be used to authenticate
>> to the DB.
>> # The user needs at least SELECT, INSERT, UPDATE, and DELETE
>> privileges on
>> # the database.
>> #db_user=ndouser
>> #db_pass=ndopassword
>> db_user=nagios
>> db_pass=nagios
>>
>> ## TABLE TRIMMING OPTIONS
>> # Several database tables containing Nagios event data can become
>> quite large
>> # over time. Most admins will want to trim these tables and keep
>> only a
>> # certain amount of data in them. The options below are used to
>> specify the
>> # age (in MINUTES) that data should be allowd to remain in
>> various tables
>> # before it is deleted. Using a value of zero (0) for any value
>> means that
>> # that particular table should NOT be automatically trimmed.
>> # Keep timed events for 24 hours
>> max_timedevents_age=1440
>> # Keep system commands for 1 week
>> max_systemcommands_age=10080
>> # Keep service checks for 1 week
>> max_servicechecks_age=10080
>> # Keep host checks for 1 week
>> max_hostchecks_age=10080
>> # Keep event handlers for 31 days
>> max_eventhandlers_age=44640
>> [root at nagios nagios]#
>>
>>
>>
>> -----Original Message-----
>> *From:* Michael Friedrich [mailto:michael.friedrich at univie.ac.at]
>> *Sent:* Thursday, June 25, 2009 12:39 PM
>> *To:* 'Natalie Aloi'
>> *Cc:* 'Nagios Users Mail-list'
>> *Subject:* Re: [Nagios-users] NDOUtils and Mysql libraries
>> assistance needed
>>
>> uhm... you should copy the new compiled binary to your
>> nagios/bin directory, but i don't think that will resolv the
>> error anyways.
>>
>> give us a plot of your ndo2db.cfg please.
>>
>>
>>
>> Natalie Aloi wrote:
>>> I guess I'm a timid user..(not running make earlier)
>>> So ran make - I didn't get any errors but it still says
>>> support for database servers not found does that mean I need
>>> to re-run for postgresql?
>>>
>>> [root at nagios ndoutils-1.3.1]# make
>>> cd ./src/; make ; cd ..
>>> make[1]: Entering directory `/tmp/ndoutils-1.3.1/src'
>>> gcc -g -O2 -DHAVE_CONFIG_H -c -o io.o io.c
>>> gcc -g -O2 -DHAVE_CONFIG_H -c -o utils.o utils.c
>>> gcc -g -O2 -DHAVE_CONFIG_H -o file2sock file2sock.c io.o
>>> utils.o -lm -lnsl
>>> gcc -g -O2 -DHAVE_CONFIG_H -o log2ndo log2ndo.c io.o
>>> utils.o -lm -lnsl
>>> make ndo2db-2x
>>> make[2]: Entering directory `/tmp/ndoutils-1.3.1/src'
>>> gcc -g -O2 -DHAVE_CONFIG_H -c -o db.o db.c
>>> gcc -g -O2 -DHAVE_CONFIG_H -D BUILD_NAGIOS_2X -c -o
>>> dbhandlers-2x.o dbhandlers.c
>>> gcc -g -O2 -DHAVE_CONFIG_H -D BUILD_NAGIOS_2X -o ndo2db-2x
>>> ndo2db.c dbhandlers-2x.o io.o utils.o db.o
>>> -L/usr/lib/mysql -lnsl -lmysqlclient
>>> make[2]: Leaving directory `/tmp/ndoutils-1.3.1/src'
>>> make ndo2db-3x
>>> make[2]: Entering directory `/tmp/ndoutils-1.3.1/src'
>>> gcc -g -O2 -DHAVE_CONFIG_H -D BUILD_NAGIOS_3X -c -o
>>> dbhandlers-3x.o dbhandlers.c
>>> gcc -g -O2 -DHAVE_CONFIG_H -D BUILD_NAGIOS_3X -o ndo2db-3x
>>> ndo2db.c dbhandlers-3x.o io.o utils.o db.o
>>> -L/usr/lib/mysql -lnsl -lmysqlclient
>>> make[2]: Leaving directory `/tmp/ndoutils-1.3.1/src'
>>> make ndomod-2x.o
>>> make[2]: Entering directory `/tmp/ndoutils-1.3.1/src'
>>> gcc -fPIC -g -O2 -DHAVE_CONFIG_H -D BUILD_NAGIOS_2X -o
>>> ndomod-2x.o ndomod.c io.o utils.o -shared -lnsl
>>> make[2]: Leaving directory `/tmp/ndoutils-1.3.1/src'
>>> make ndomod-3x.o
>>> make[2]: Entering directory `/tmp/ndoutils-1.3.1/src'
>>> gcc -fPIC -g -O2 -DHAVE_CONFIG_H -D BUILD_NAGIOS_3X -o
>>> ndomod-3x.o ndomod.c io.o utils.o -shared -lnsl
>>> make[2]: Leaving directory `/tmp/ndoutils-1.3.1/src'
>>> gcc -g -O2 -DHAVE_CONFIG_H -o sockdebug sockdebug.c io.o
>>> utils.o -lm -lnsl
>>> make[1]: Leaving directory `/tmp/ndoutils-1.3.1/src'
>>> [root at nagios /]# cd /tmp/ndoutils-1.3.1
>>> [root at nagios ndoutils-1.3.1]# ndo2db-2x -c
>>> /etc/nagios/ndo2db.cfg
>>> Support for the specified database server is either not yet
>>> supported, or was not found on your system.
>>> [root at nagios ndoutils-1.3.1]#
>>>
>>> -----Original Message-----
>>> *From:* Natalie Aloi [mailto:naloi at experisdatacenters.com]
>>> *Sent:* Thursday, June 25, 2009 09:41 AM
>>> *To:* 'Nagios Users Mail-list'
>>> *Subject:* Re: [Nagios-users] NDOUtils and Mysql
>>> libraries assistance needed
>>>
>>> Ok...making progress...after rerunning the config the
>>> sql libraries were found but now I get about postgresql
>>> support....Do I need this? Or Can I just run make?
>>> MySQL library and include file(s) were found!
>>> checking for PQconnectdb in -lpq... no
>>>
>>> *** PostgreSQL library could not be located...
>>> *********************
>>> You chose to compile NDBXT with PostgreSQL support, but
>>> I was
>>> unable to locate the PostgreSQL library on your system.
>>> If the
>>> library is installed, use the --with-pgsql-lib argument
>>> to specify
>>> the location of the PostgreSQL library.
>>> NOTE: After you install the necessary libraries on your
>>> system:
>>> 1. Make sure /etc/ld.so.conf has an entry for the
>>> directory in
>>> which the PostgreSQL libraries are installed.
>>> 2. Run 'ldconfig' to update the run-time linker
>>> options.
>>> 3. Run 'make devclean' in the NDBXT distribution
>>> to clean out
>>> any old references to your previous compile.
>>> 4. Rerun the configure script.
>>> ********************************************************************
>>>
>>> checking libpq-fe.h usability... no
>>> checking libpq-fe.h presence... no
>>> checking for libpq-fe.h... no
>>>
>>> *** PostgreSQL include file could not be located...
>>> ****************
>>> You chose to compile NDBXT with PostgreSQL support, but
>>> I was unable
>>> to locate <libpq-fe.h> on your system. If the include
>>> file is
>>> installed, use the --with-pgsql-inc argument to specify
>>> the location
>>> of the PostgreSQL include file.
>>> ********************************************************************
>>>
>>> configure: creating ./config.status
>>> config.status: creating Makefile
>>> config.status: creating src/Makefile
>>> config.status: creating include/config.h
>>>
>>> *** ndoutils 1.3.1 02-15-2006 ***
>>>
>>> Type 'make' to compile the NDO utilities.
>>> [root at nagios ndoutils-1.3.1]#
>>>
>>> -----Original Message-----
>>> *From:* Natalie Aloi
>>> [mailto:naloi at experisdatacenters.com]
>>> *Sent:* Thursday, June 25, 2009 09:29 AM
>>> *To:* 'Nagios Users Mail-list'
>>> *Subject:* Re: [Nagios-users] NDOUtils and Mysql
>>> libraries assistance needed
>>>
>>> So this is what's in ld.so.conf.d....do I just do
>>> steps 2-4 now since there is already a file
>>> that points to it - or do I need to rename
>>> mysql-i386.conf to mysql.conf?
>>>
>>> [root at nagios ld.so.conf.d]# ls -lat
>>> total 32
>>> drwxr-xr-x 144 root root 12288 2009-06-23 04:06 ..
>>> drwxr-xr-x 2 root root 4096 2009-04-28 16:01 .
>>> -rw-r--r-- 1 root root 23 2009-04-27 08:31
>>> xulrunner-32.conf
>>> -rw-r--r-- 1 root root 15 2009-03-07 18:39
>>> mysql-i386.conf
>>> -rw-r--r-- 1 root root 16 2008-10-21 05:02
>>> tix-i386.conf
>>> -rw-r--r-- 1 root root 20 2008-07-07 15:49
>>> qt-i386.conf
>>> [root at nagios ld.so.conf.d]# more mysql-i386.conf
>>> /usr/lib/mysql
>>> [root at nagios ld.so.conf.d]#
>>>
>>> -----Original Message-----
>>> *From:* Guy Waugh [mailto:guidosh at gmail.com]
>>> *Sent:* Thursday, June 25, 2009 09:07 AM
>>> *To:* 'Natalie Aloi'
>>> *Subject:* Re: [Nagios-users] NDOUtils and Mysql
>>> libraries assistance needed
>>>
>>> Hello,
>>>
>>> On Thu, Jun 25, 2009 at 1:57 PM, Natalie Aloi
>>> <naloi at experisdatacenters.com
>>> <mailto:naloi at experisdatacenters.com>> wrote:
>>>
>>> Hi I am having trouble getting ndoutils to work
>>> during my install I found this information
>>> logged:
>>>
>>> *** MySQL library could not be located...
>>> **************************
>>> You chose to compile NDBXT with MySQL
>>> support, but I was unable to
>>> locate the MySQL library on your system. If
>>> the library is
>>> installed, use the --with-mysql-lib
>>> argument to specify the
>>> location of the MySQL library.
>>> NOTE: After you install the necessary
>>> libraries on your system:
>>> 1. Make sure /etc/ld.so.conf has an
>>> entry for the directory in
>>> which the MySQL libraries are
>>> installed.
>>> 2. Run 'ldconfig' to update the
>>> run-time linker options.
>>> 3. Run 'make devclean' in the NDBXT
>>> distribution to clean out
>>> any old references to your previous
>>> compile.
>>> 4. Rerun the configure script.
>>> TIP: Try the following....
>>> ./configure
>>> --with-mysql-lib=/usr/lib/mysql
>>> I have a question about step 1. When I more
>>> the file all it has in it is this information:
>>>
>>> [root at nagios etc]# more ld.so.conf
>>> include ld.so.conf.d/*.conf
>>>
>>> My question is what is the syntax of the
>>> libraries I have no idea what to add into
>>> this file.
>>> Do I just add "/usr/lib/mysql" ?
>>>
>>>
>>> The best thing to do would be to create a file
>>> in '/etc/ld.so.conf.d' called 'mysql.conf' that
>>> contains, as you suggest, one line thus:
>>> '/usr/lib/mysql' (without the quotes). Then,
>>> proceed with steps 2, 3 and 4 above.
>>>
>>> Cheers,
>>> Guy.
>>>
>>>
>>>
>>> I am running Fedora 9
>>> mysql has been installed (see below:)
>>> [root at nagios etc]# rpm -qa | grep mysql
>>> qt-mysql-4.5.0-14.fc9.i386
>>> mysql-administrator-5.0r12-8.fc9.i386
>>> mysql-server-5.0.77-1.fc9.i386
>>> mysql-devel-5.0.77-1.fc9.i386
>>> mysql-connector-odbc-3.51.24r1071-1.fc9.i386
>>> mysql-connector-java-3.1.12-5.fc9.i386
>>> php-mysql-5.2.6-2.fc9.i386
>>> mysql-5.0.77-1.fc9.i386
>>> libdbi-dbd-mysql-0.8.3-2.fc9.i386
>>> mysql-libs-5.0.77-1.fc9.i386
>>> nagios-plugins-mysql-1.4.13-9.fc9.i386
>>> mysql-gui-common-5.0r12-8.fc9.i386
>>> below is infor from mysql for nagios db for
>>> ndoutils....
>>> mysql> use nagios
>>> Reading table information for completion of
>>> table and column names
>>> You can turn off this feature to get a
>>> quicker startup with -A
>>> Database changed
>>> mysql> show tables;
>>> +-------------------------------------+
>>> | Tables_in_nagios |
>>> +-------------------------------------+
>>> | ndo_acknowledgements |
>>> | ndo_commands |
>>> | ndo_commenthistory |
>>> | ndo_comments |
>>> | ndo_configfiles |
>>> | ndo_configfilevariables |
>>> | ndo_conninfo |
>>> | ndo_contact_addresses |
>>> | ndo_contact_notificationcommands |
>>> | ndo_contactgroup_members |
>>> | ndo_contactgroups |
>>> | ndo_contactnotificationmethods |
>>> | ndo_contactnotifications |
>>> | ndo_contacts |
>>> | ndo_customobjectvariables |
>>> | ndo_downtimehistory |
>>> | ndo_eventhandlers |
>>> | ndo_externalcommands |
>>> | ndo_flappinghistory |
>>> | ndo_host_contactgroups |
>>> | ndo_host_parenthosts |
>>> | ndo_hostchecks |
>>> | ndo_hostdependencies |
>>> | ndo_hostescalation_contactgroups |
>>> | ndo_hostescalations |
>>> | ndo_hostextinfo |
>>> | ndo_hostgroup_members |
>>> | ndo_hostgroups |
>>> | ndo_hosts |
>>> | ndo_hoststatus |
>>> | ndo_instances |
>>> | ndo_logentries |
>>> | ndo_notifications |
>>> | ndo_objects |
>>> | ndo_processevents |
>>> | ndo_programstatus |
>>> | ndo_runtimevariables |
>>> | ndo_scheduleddowntime |
>>> | ndo_service_contactgroups |
>>> | ndo_servicechecks |
>>> | ndo_servicedependencies |
>>> | ndo_serviceescalation_contactgroups |
>>> | ndo_serviceescalations |
>>> | ndo_serviceextinfo |
>>> | ndo_servicegroup_members |
>>> | ndo_servicegroups |
>>> | ndo_services |
>>> | ndo_servicestatus |
>>> | ndo_statehistory |
>>> | ndo_systemcommands |
>>> | ndo_timedeventqueue |
>>> | ndo_timedevents |
>>> | ndo_timeperiod_timeranges |
>>> | ndo_timeperiods |
>>> +-------------------------------------+
>>> 54 rows in set (0.00 sec)
>>> mysql>
>>>
>>> Network Operations Center Manager
>>> Experis Data Center LLC
>>> 8209 Valley Pike
>>> PO Box 535
>>> Middletown,VA 22645
>>> phone:540-869-8702
>>> cell:240-988-3267
>>> fax:540-869-8710
>>> mailto:e-mail%3Analoi at experisdatacenters.com
>>>
>>> ------------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Nagios-users mailing list
>>> Nagios-users at lists.sourceforge.net
>>> <mailto:Nagios-users at lists.sourceforge.net>
>>> https://lists.sourceforge.net/lists/listinfo/nagios-users
>>> ::: Please include Nagios version, plugin
>>> version (-v) and OS when reporting any issue.
>>> ::: Messages without supporting info will
>>> risk being sent to /dev/null
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> ------------------------------------------------------------------------------
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Nagios-users mailing list
>>> Nagios-users at lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/nagios-users
>>> ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue.
>>> ::: Messages without supporting info will risk being sent to /dev/null
>>
>> ------------------------------------------------------------------------
>>
>> ------------------------------------------------------------------------------
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Nagios-users mailing list
>> Nagios-users at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/nagios-users
>> ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue.
>> ::: Messages without supporting info will risk being sent to /dev/null
>>
>
> ------------------------------------------------------------------------
>
> ------------------------------------------------------------------------------
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
>
--
DI (FH) Michael Friedrich
michael.friedrich at univie.ac.at
Tel: +43 1 4277 14359
Vienna University Computer Center
Universitaetsstrasse 7
A-1010 Vienna, Austria
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.monitoring-lists.org/archive/users/attachments/20090629/fbe0ab1e/attachment.html>
-------------- next part --------------
------------------------------------------------------------------------------
-------------- next part --------------
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null
More information about the Users
mailing list