<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> <HTML> <HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii"> <META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7036.0"> <TITLE>RE: HP Network Printer</TITLE> </HEAD> <BODY>  Update, but I'm still getting "Error in packet ( ) " in my printer status I can walk the Mibs with snmpwalk -v 1 -c public 192.168.3.252 and see all the relevant outputs but when I do the following: - ./check_snmp -H 192.168.3.252 -C public I get SNMP problem - No Data received from host CMD /usr/bin/snmpget -t 1 -r5 -m ' ' -v 1 [authpriv] 192.168.3.252:161 Hope you can help _____________________________________________ From: Martyn [<A HREF="mailto:martyn@chetnet.co.uk">mailto:martyn@chetnet.co.uk</A>] Sent: 02 February 2009 17:33 To: 'nagios-users@lists.sourceforge.net' Subject: HP Network Printer Just looking to start and monitor an HP 2600n printer and have come across the following statement in the quick start guide The check_hpjd plugin will only get compiled and installed if you have the net-snmp and net-snmp-utils packages installed on your system. Make sure the plugin exists in /usr/local/nagios/libexec before you continue. If it doesn’t, install net-snmp and net-snmp-utils and recompile/reinstall the Nagios plugins. OK do these get installed when you download and compile nagios-plugins-1.4.11.tar.gz or do I have to grab then separately, I have looked through my nagios/libexec directory and noticed that check_snmp is in there but not the above two. Where would I get hold of the two files as described Thanks for your continued support Martyn </BODY> </HTML>