FW: 3d Map

Ethan Galstad nagios at nagios.org
Wed Oct 23 02:03:06 CEST 2002


Fix for #1 just made it into CVS.  Fix for #2 was in CVS last week.


On 22 Oct 2002 at 15:29, Carroll, Jim P [Contractor] wrote:

> Two things:
> 
> 1) Don't use hostnames with dots in them.
> 
> 2) For the time being, don't both with 3d_coords.  In cgi.cfg, set
> default_statuswrl_layout to *anything* but 0 (ie, set it to one of the other
> values listed, 2, 3, or 4).
> 
> Make those changes, restart nagios, and see what happens.
> 
> (Sidebar: I believe Ethan is working on correcting at least item #2.)
> 
> jc
> 
> > -----Original Message-----
> > From: Kaplan, Andrew H. [mailto:AHKAPLAN at PARTNERS.ORG]
> > Sent: Tuesday, October 22, 2002 2:42 PM
> > To: Nagios-users at lists.sourceforge.net
> > Subject: [Nagios-users] FW: 3d Map
> > 
> > 
> > 
> > 
> > -----Original Message-----
> > From: Kaplan, Andrew H. 
> > Sent: Tuesday, October 22, 2002 1:16 PM
> > To: 'Jon Lyons'
> > Subject: RE: 3d Map
> > 
> > 
> > Hi Jon,
> > 
> > I started configuring the information for the 3D status map. 
> > I went to the
> > CVS site and downloaded the source file
> > for the newer version of statuswrl.cgi. I went through 
> > compiling the file
> > and then copied it to the sbin 
> > directory under Nagios. I also installed the Cortona plug-in 
> > for Internet
> > Explorer. After that I went through the 
> > motions of modifying the hostextinfo.cfg file. Shown below is the
> > configuration of the first host that I wanted 
> > to test out.
> > 
> > # Bugzilla definition
> > define hostextinfo{
> > 	host_name		bugzilla.mgh.harvard.edu
> > 	icon_image		linux40.jpg
> > 	icon_image_alt		Linux
> > 	vrml_image		linux40.jpg
> > 	statusmap_image		linux40.jpg
> > 	gd2_image		linux40.jpg
> > 	register		1
> > 	3d_coords		20.0,7.0,0.0		; 3-D Drawing
> > Coordinates
> > 	}
> > 
> > When I restarted Nagios and attempted to access the 3D map 
> > display, I got to
> > the 3-D map screen but no images appeared.
> > Also, the Cortona console appeared with the following message:
> > 
> > name expected
> > File: http://nagios/cgi-bin/nagios/statuswrl.cgi?host=all
> > Line: 229
> > Column: 24
> > 
> > I'm guessing that something went wrong with the compiling of 
> > the cgi file,
> > but I'm not positive on that. What do you think?
> > 
> > -----Original Message-----
> > From: Jon Lyons [mailto:jlyons30 at yahoo.com]
> > Sent: Monday, October 21, 2002 4:53 PM
> > To: Kaplan, Andrew H.
> > Subject: Re: 3d Map
> > 
> > 
> > 
> > Search the archives, here's an e-mail that should get
> > you rolling(check the paths!), you'll need to get the
> > new statuswrml.c(think thats the name) from the CVS
> > download  and compile it for the userdefined 3d
> > coordinates to work...Otherwise the auto layout
> > features work fine.
> > 
> > ---------
> > sorry, it's in the cfg.cgi file, I've been doing 3-d
> > coordinates(100+ to go..ugh!) all day and my brain is
> > mush.
> > 
> >  "Kaplan, Andrew H." <AHKAPLAN at PARTNERS.ORG> wrote:
> > Jon,
> >  
> > Did you mean the cgi.cfg file as opposed to the
> > cfg.cgi file? I have the former, but not the latter
> > file.
> > -----Original Message-----
> > From: Jon Lyons [mailto:jlyons30 at yahoo.com]
> > Sent: Wednesday, October 16, 2002 4:08 PM
> > To: Kaplan, Andrew H.
> > Cc: 'Nagios-users at lists.sourceforge.net'
> > Subject: RE: [Nagios-users] Getting the icons to work
> > on the Map
> > 
> > I have in my cfg.cgi file;
> > 
> > xedtemplate_config_file=/usr/local/etc/nagios/hostextinfo.cfg
> > 
> > xedtemplate_config_file=/usr/local/etc/nagios/serviceextinfo.cfg
> > 
> > and in hostextinfo.cfg I use templates since I have
> > lots of devices...
> > 
> > define hostextinfo{
> >         name baystack450
> >         icon_image              baystack450.jpg
> >         icon_image_alt          Bay Stack 450
> >         notes_url               http://www.ebay.com
> >         vrml_image              baystack450.jpg
> >         statusmap_image         baystack450.jpg
> >         gd2_image               baystack450.jpg
> >         register                0                     
> >  ;  DO NOT REGISTER THIS
> >         }      
> > 
> > define hostextinfo{
> >         use baystack450
> >         host_name               1b6-n-qnetsw01
> >         2d_coords               0,150                 
> >  ; 2-D drawing coordinate
> >         3d_coords               20.0,7.0,0.0          
> > ; 3-D drawing coordinates
> >         }  
> > 
> >  "Kaplan, Andrew H." <AHKAPLAN at PARTNERS.ORG> wrote:
> > No, I didn't. I went to the cgi.cfg file and added the
> > hostextinfo and xedtemplate lines to the EXTENDED HOST
> > INFORMATION section. I then used
> > the TOUCH command to create the xedtemplate.cfg file,
> > and then edited the file to include three servers
> > within it. I'm including a copy of the file with the
> > email. 
> > 
> > 
> > 
> > --- "Kaplan, Andrew H." <AHKAPLAN at PARTNERS.ORG> wrote:
> > > Hi Jon,
> > > 
> > > sorry to bother you...
> > > 
> > > I am getting ready to set up the 3d status map and I
> > > was wondering what
> > > steps you took to get yours set up? Thanks.
> > 
> > 
> > __________________________________________________
> > Do you Yahoo!?
> > Y! Web Hosting - Let the expert host your web site
> > http://webhosting.yahoo.com/
> > 
> > 
> > -------------------------------------------------------
> > This sf.net emial is sponsored by: Influence the future 
> > of Java(TM) technology. Join the Java Community 
> > Process(SM) (JCP(SM)) program now. 
> > http://ad.doubleclick.net/clk;4699841;7576301;v?http://www.sun
> .com/javavote
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> 
> 
> -------------------------------------------------------
> This sf.net emial is sponsored by: Influence the future 
> of Java(TM) technology. Join the Java Community 
> Process(SM) (JCP(SM)) program now. 
> http://ad.doubleclick.net/clk;4699841;7576301;v?http://www.sun.com/javavote
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> 



Ethan Galstad,
Nagios Developer
---
Email: nagios at nagios.org
Website: http://www.nagios.org



-------------------------------------------------------
This sf.net emial is sponsored by: Influence the future 
of Java(TM) technology. Join the Java Community 
Process(SM) (JCP(SM)) program now. 
http://ad.doubleclick.net/clk;4699841;7576301;v?http://www.sun.com/javavote




More information about the Users mailing list