nrpe not working

[emily zhou]

Exactly, after I sent the message, took a closely check, I got it. Sorry to
bother you.
Thanks,
Emily

"Carroll, Jim P [Contractor]" wrote:

> In checkcommands.cfg, you're passing a "-H" switch to check_nrpe.  However,
> check_nrpe doesn't use the -H switch.
>
> Remove that and you should be fine.
>
> jc
>
> > -----Original Message-----
> > From: emily zhou [mailto:Emily.Zhou at algonquincollege.com]
> > Sent: Tuesday, March 18, 2003 4:46 PM
> > To: Carroll, Jim P [Contractor]
> > Cc: 'Jeff McKeon'; Nagios List
> > Subject: Re: [Nagios-users] nrpe not working
> >
> >
> > Hi JC,
> > I guess you have experience with NRPE, could you give me some clue?
> > I use command line working fine:   (Both Server and Client
> > are Solaris 8)
> > ~libexec/check_nrpe <remote server name or address> -c check_disk1
> > DISK OK - [2724125 kB (52%) free on /dev/dsk/c0t3d0s7]
> >
> > However, when I put in the nagios, it's not working, the
> > status information is :
> > Incorrect command line arguments supplied, my config file this:
> >
> > in checkcommands.cfg:
> > # 'check_nrpe' command definition
> > define command{
> >  command_name check_nrpe
> >  command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
> >  }
> >
> > In services.cfg:
> > define service{
> >         use                                   generic-service
> >         host_name                        netsrv
> >         service_description           File System / Check
> >         is_volatile                          0
> >         check_period                    24x7
> >         max_check_attempts          3
> >         normal_check_interval        5
> >         retry_check_interval           1
> >         contact_groups                  unix-admins
> >         notification_interval           120
> >         notification_period             24x7
> >         notification_options            c,r
> >         check_command               check_nrpe!check_disk1
> >         name                            remotefstemp
> >         }
> >
> > In remote server's nrpe.cfg, the check_disk1 is defined, no
> > doubt about that, as
> > the command line is working.
> > Any help would be appreciated.
> > Thanks,
> > Emily
> >
> > "Carroll, Jim P [Contractor]" wrote:
> >
> > > Try telnetting to port 5666 on the target host; see if you
> > get a connection.
> > >
> > > Try installed check_nrpe on the target host and doing this command:
> > >
> > >    ./check_nrpe localhost -c check_disk1
> > >
> > > Let us know how that goes.
> > >
> > > jc
> > >
> > > > -----Original Message-----
> > > > From: Jeff McKeon [mailto:jsm at inpro.net]
> > > > Sent: Monday, November 25, 2002 2:32 PM
> > > > To: Nagios List
> > > > Subject: [Nagios-users] nrpe not working
> > > >
> > > >
> > > > Hey guys/gals,
> > > >
> > > > Needed to set up linux disk monitoring of a remote host.
> > downloaded
> > > > nrpe (as suggested by mailing list) and installed the
> > daemon on the
> > > > remote host according to the directions.  Also copied the
> > check_disk
> > > > plugin to that remote server.
> > > >
> > > > installed on the nagios host server and coped the
> > check_nrpe to the
> > > > /usr/local/nagios/libexec dir.
> > > >
> > > > confirmed that a check_disk command issued at the command
> > prompt will
> > > > work on the remote host.  So at least I know that works...
> > > >
> > > > Left the nrpe.cfg file as is, placed it in the /etc/ dir.
> > > >
> > > > below is the nrpe xinetd file I've modified.
> > > >
> > > > Problem::::
> > > >
> > > > If on the nagios host machine I issue:
> > > >
> > > > [jsm at rh80-jsm jsm]$ cd /usr/local/nagios/libexec/
> > > > [jsm at rh80-jsm libexec]$ ./check_nrpe 10.32.1.12 -c check_disk1
> > > > CHECK_NRPE: Error receiving data from host.
> > > > [jsm at rh80-jsm libexec]$
> > > >
> > > > I get the error shown.
> > > >
> > > > If I look on the remote host in the var/log/messages file I get:
> > > >
> > > > Nov 25 20:12:37 db02tc07927 xinetd[2777]: execv(
> > > > /usr/local/nagios/libexec ) failed: Permission denied (errno = 13)
> > > >
> > > > Any suggestions on what I'm doing wrong?
> > > >
> > > >         # default: on
> > > >         # description: NRPE
> > > >         service nrpe
> > > >         {
> > > >                 flags           = REUSE
> > > >                 socket_type     = stream
> > > >                 wait            = no
> > > >                 user            = nagios
> > > >                 server          = /usr/local/nagios/libexec/nrpe
> > > >                 server_args     = -i /etc/nrpe.cfg
> > > >                 log_on_failure  += USERID
> > > >                 disable         = no
> > > >                 only_from       = 127.0.0.1 10.16.2.101
> > > >         }
> > > >
> > > >
> > > >
> > > > Nov 25 20:12:37 db02tc07927 xinetd[2777]: execv(
> > > > /usr/local/nagios/libexec ) failed: Permission denied (errno = 13)
> > > >
> > > >
> > > >
> > > >
> > > > -------------------------------------------------------
> > > > This SF.net email is sponsored by: Get the new Palm Tungsten T
> > > > handheld. Power & Color in a compact size!
> > > > http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en
> > > > _______________________________________________
> > > > Nagios-users mailing list
> > > > Nagios-users at lists.sourceforge.net
> > > > https://lists.sourceforge.net/lists/listinfo/nagios-users
> > > >
> > >
> > > -------------------------------------------------------
> > > This SF.net email is sponsored by: Get the new Palm Tungsten T
> > > handheld. Power & Color in a compact size!
> > > http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en
> > > _______________________________________________
> > > Nagios-users mailing list
> > > Nagios-users at lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/nagios-users
> >
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: Does your code think in ink?
> > You could win a Tablet PC. Get a free Tablet PC hat just for playing.
> > What are you waiting for?
> > http://ads.sourceforge.net/cgi-bin/redirect.pl?micr5043en
> > _______________________________________________
> > Nagios-users mailing list
> > Nagios-users at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/nagios-users
> > ::: Please include Nagios version, plugin version (-v) and OS
> > when reporting any issue.
> > ::: Messages without supporting info will risk being sent to /dev/null
> >



-------------------------------------------------------
This SF.net email is sponsored by: Does your code think in ink? 
You could win a Tablet PC. Get a free Tablet PC hat just for playing. 
What are you waiting for?
http://ads.sourceforge.net/cgi-bin/redirect.pl?micr5043en
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null